Tiger 100 Prices

Discussion in 'Vintage Classics' started by Obijohnkenobe, May 24, 2025.

  1. Obijohnkenobe

    Obijohnkenobe Well-Known Member

    Dec 14, 2020
    173
    83
    Tonbridge, Kent, UK
    Excellent. No matter whether you like "classic" or newer models, surely no one can deny that the classics look superb. Whatever you think of Edward Turner, he sure had an eye for style! I'll follow your builds with interest.
     
    • Like Like x 2
    • Agree Agree x 1
  2. Obijohnkenobe

    Obijohnkenobe Well-Known Member

    Dec 14, 2020
    173
    83
    Tonbridge, Kent, UK
    DaveQ I have actually now replaced the bars for lower, narrower ones and I have to say that so far I actually prefer the higher ones! Although I'm sure the bike is faster as I'm a little less of a wind-break now. I'll get used to them for a while and see how I go.

    Another advantage of narrower bars is that I can squeeze the bike into the garage with my other two, a bit easier now! My better half is insisting that I can't keep all three but I'm holding out until she gives up or forgets about them.
     
    • Like Like x 2
  3. DaveQ

    DaveQ Senior Member

    Jul 28, 2022
    302
    113
    Surrey. England
    Ha! I’ve just got mine back from the chromers along with other bits at vast expense, so I guess I’ve got to like them now. :) They look nice though :cool:
     
    • Like Like x 1
  4. Obijohnkenobe

    Obijohnkenobe Well-Known Member

    Dec 14, 2020
    173
    83
    Tonbridge, Kent, UK
    Following your resto. Truly a labour of love.
     
    • Like Like x 2
  5. Obijohnkenobe

    Obijohnkenobe Well-Known Member

    Dec 14, 2020
    173
    83
    Tonbridge, Kent, UK
    Took the Daytona out for a good ride today and very pleased. She seems to be doing everything she should at the moment. Even ticked over nicely when fairly cold, although perhaps I'm cheating a bit as she's a touch fast when properly hot so I should probably undo the throttle stops a touch more for idling when hot.

    Also quite pleased as I inspected my tacho drive leak. Turned out that the small bolt on the inside of the drive was loose. Fearing a possible stripped thread I gingerly tightened it and it was OK. So I took it out, applied some blue hylomar (which must be over 30 years old!!!) And did the bolt back up tight as I dared and hey presto, no leak.

    Anyone know what that bolt does? My old 5TA didn't have such advanced technology as a tacho so its all new to me .....:cool:
     
    • Like Like x 2
  6. joe mc donald

    Subscriber

    Dec 26, 2014
    15,317
    1,000
    slough / burnham
    @Obijohnkenobe Nice to hear all is good.
     
  7. DaveQ

    DaveQ Senior Member

    Jul 28, 2022
    302
    113
    Surrey. England
    #27 DaveQ, Aug 17, 2025
    Last edited: Aug 17, 2025

    Not sure if I’m talking about the same bolt here, but it sounds like the small retaining bolt for the tacho driven gear housing. There should be a small spigot on the end of the bolt that engages in an annular groove in the housing that carries the driven gear. It prevents the action of the helical teeth of the drive gear pushing the driven gear upwards and out of engagement while it’s running. If you were to disconnect the cable and take that bolt out you should be able to remove the housing, driven gear and associated bits together.
     
    • Useful Useful x 1
  8. Obijohnkenobe

    Obijohnkenobe Well-Known Member

    Dec 14, 2020
    173
    83
    Tonbridge, Kent, UK
    Thanks Dave. That does sound like what I'm talking about. Many thanks for the info. Every day is a learning day.
     
    • Agree Agree x 1
Loading...

Share This Page