Gauging Grabrail Interest

Hi there, I am obviously new to this forum, but I have owned my Speed Twin for around 7 months now. (Been biking for 36yrs).
I have done a few mods to the Speed Twin, which I'm sure have been done by most, as they are the usual things.
However, on purchasing the Twin, I was surprised to learn that there were no suitable grabrail options.
Triumph don't list one,
Renntec make a squared off one
Motone make one that will probably fit if you butcher it,
And, you can get a cheap Chinese copy of the Motone if you like poor quality.
This led me to take some measurements and design my own.
I can't take credit for any of the manufacturing, because a friend of mine who is an experienced engineer, has made the item, but 1) I wanted your opinions and 2) I wondered if anyone had discovered the same problem, and would be interested in one ?

This is the item.
It fits first time, and looks suited to the bike (to my eye).

See what you think.

 

That's exactly the thing. The only option that I'm aware of for the 1200, is the Renntec option which will fit 'out of the box'. However, to my eye, the 1200 is a very 'rounded' bike, and the Renntec rail is very square. It just doesn't look right to me.
The only other options need to be hacked around to fit, which I feel is kind of pointless.
The main thing that confuses me is why Triumph have not made one as an accessory. The mounting points are there on the subframe !!!

Anyway, if anyone would like one made, send me a DM, and I'll see what I can do. I'm not sure on a price yet, but the materials for mine cost £40, and then there is the time to cut, form and weld by my friend. It's hard to know what is a reasonable cost ?

 

Looking good