Sticky Clutch On A 2006 Thruxton

I have just fitted new clutch plates to my 2006 thruxton that's new steel and fiber ones and now I am having problems with the clutch it will not release I made sure the the center bearing plate was done up correctly and the pin that sits in rotates freely
I can put the bike in gear and try to spin the back wheel with the clutch in and with no spark plugs but the wheel will not turn freely then it will free off but let go of the lever and then retry it does the same thing so am a bit of a loss here of what to try next

 

Hi sorry for the delay yes they was oiled and the cable run is ok