Obd Connector On A 2024 Tiger 900

This is where it is on my 2022 gt pro Wether they’ve done away with or changed it for the 2024 would seem unlikely but not impossible!

 

Ok searched on another forum and it has changed it is red, there is an adapter



The images below show the mating lead you need to connect regular ELM327 / OBD2 interfaces to the bike, and the pinout between the leads. The numbers in brackets show the connection at the 6-pin end of the lead. It's possible that Triumph use a slightly different source for the signal at pin 1 on the new connector because they use pin 12 on the old connector as a switched 12V supply on the newer bikes, rather than pin 9, so it wouldn't surprise me if they made a custom lead!