Led

Discussion in 'Technical Help' started by Matthew macdonald, Aug 4, 2023.

  1. Matthew macdonald

    Matthew macdonald New Member

    Aug 4, 2023
    0
    1
    Uk
    Hi there
    Trying to fit fading LED indicators on my 2019 scrambler 1200 XE
    They flash once then stop and a warning on the dash comes up
    Can anyone help with this
     
  2. sprintdave

    sprintdave Nurse, think it's time for his medications.
    Subscriber

    May 25, 2014
    1,622
    750
    Birmingham
    Have you changed the relay, the original doesnt work with LED. Also I believe that unlike standard indicators where you can connect the wires either way, LED need to be connected pos to pos and neg to neg.
     
    • Agree Agree x 1
  3. Eldon

    Eldon Elite Member

    Nov 14, 2018
    6,775
    800
    North Yorkshire
    Yes LED is polarity sensitive.
     
    • Useful Useful x 1
  4. Wire-Wheels

    Wire-Wheels Elite Member

    Apr 26, 2019
    2,497
    800
    California - USA
    I doubt you are going to be able to make this work. If you have an indicator for this system on the dash, I believe it is a can-buss type of system. I don't think this is compatible with LED indicators. Someone correct me if I am wrong. ...J.D.
     
  5. Pegscraper

    Pegscraper Elite Member

    Jun 12, 2020
    3,429
    800
    Yorkshire
    On the Street Scrambler the ECU can set to accept LED indicators but I've no idea if this applies to other models.....


    Some load resistors to make the ECU "think" normal bulbs are installed or CANBUS specific LED bulbs should work although some CANBUS systems can cause LED's to flicker.
     
Loading...

Share This Page