Scraping Pegs - Scary

Discussion in 'Triumph General Discussion' started by Armando Morales, Jun 26, 2023.

  1. Armando Morales

    Armando Morales Noble Member

    Mar 29, 2021
    931
    443
    Mexico
    #1 Armando Morales, Jun 26, 2023
    Yesterday ride, on my favorite twisty road by myself... taking it easy , trying to be as smooth as possible , 300kms round trip, 4 hrs.
    But I scraped the pegs twice, I hate it when that happens , I feel I'm too close to the limit of leaning when the pegs touch the ground
    1. Race bikes coming on the other lane, riding pretty fast and invading my lane, I started to ride slower and farther away from the other lane ... I scrapped the right peg ... as I leaned the bike more to stay on the inside ... I guess I should have brake a little more rather than leaning the bike
    2. A blind right turn , not difficult, a bit wide, I felt good , a car comes on the other line with tyres on the middle line, it is almost the end of the curve , I was already accelerating and getting close to the middle line, I had to countersteer and the peg touched the ground as I passed close to the car ... again if I were going slower I would be that close to the center line.

    SO I guess I was not really taking it easy , need to cool down more
     
    • Like Like x 1
    • WTF WTF x 1
  2. Helmut Visor

    Helmut Visor Only dead fish go with the flow
    Subscriber

    Oct 3, 2018
    6,369
    1,000
    Three Counties
    #2 Helmut Visor, Jun 26, 2023
    I hear you Armando, not sure a Thunderbird Nightstorm should be treated quite like that either but guess there's a reason the blobs are on the footpegs :joy:
    354483136_2342390245949896_4602134830712994997_n.jpg 356795470_723671302895321_8725446519427980442_n.jpg
     
    • Like Like x 2
    • Agree Agree x 2
  3. Pegscraper

    Pegscraper Elite Member

    Jun 12, 2020
    3,466
    800
    Yorkshire
    #3 Pegscraper, Jun 27, 2023
    That's what the "feelers", or hero blobs as some call them are there for, to tell you when your approaching the bikes lean limit before other things like fairings (if you have one) and engine casings etc start grounding out which can end in tears. Safe lean angle can obviously vary hugely between bikes. I dropped my first Fireblade in 1994 going into a familiar RH bend way faster than I'd ever done before, scraping the RH peg, then realising I wasn't turning quick enough, leant it over some more and down I went.
    The bike was quite badly damaged so I'm not sure what touched down first but it could have been the exhaust. The really embarrassing part was I'd just passed an Escort RS Turbo half a mile or so back and he just drove past without stopping, probably p*ssing himself. I must have looked a right tosser.:sob:
     
    • Like Like x 3
    • Funny Funny x 2
  4. Armando Morales

    Armando Morales Noble Member

    Mar 29, 2021
    931
    443
    Mexico
    #4 Armando Morales, Jun 27, 2023
    thanks,
    leaning too much is what I want to avoid
    Good thing you are here telling about your mishap
     
    • Like Like x 1
    • Agree Agree x 1
  5. Mongoose

    Mongoose Well-Known Member

    Feb 19, 2023
    83
    68
    Georgia
    #5 Mongoose, Jul 3, 2023
    What is a right tosser? The Mad Mongoose.....OUT!
     
    • Funny Funny x 4
  6. Pegscraper

    Pegscraper Elite Member

    Jun 12, 2020
    3,466
    800
    Yorkshire
    #6 Pegscraper, Jul 3, 2023
    • Like Like x 1
    • Funny Funny x 1
    • Agree Agree x 1
  7. Eldon

    Eldon Elite Member

    Nov 14, 2018
    6,961
    800
    North Yorkshire
    #7 Eldon, Jul 3, 2023
    Who's called " what"?
    :joy::joy::joy:

    I thought @Mongoose was making a statement :laughing:
     
  8. Armando Morales

    Armando Morales Noble Member

    Mar 29, 2021
    931
    443
    Mexico
    #8 Armando Morales, Jul 3, 2023
    Went out yesterday, very twisty road, did not scrape the pegs once, I was riding at a more relaxed pace, very nice weather
    Here is the bike at the side of the road
    upload_2023-7-3_12-3-32.png
     
    • Like Like x 4
  9. andyc1

    andyc1 Lunarville 7, Airlock 3

    Feb 4, 2017
    2,927
    1,000
    N. Ireland
    #9 andyc1, Jul 3, 2023
    When I had the tiger 800 it would scrape pegs all the time, its only a shock the first few times... I actually ripped the feeler thing off completely on a pretty rough road surface! Depends on the bike. Other bikes that I've owned would be prone to this, scrambler 1200 and a bonneville. I had a loan of a bobber once, it was scraping the pegs as I rode it out of the dealers forecourt :joy:
     
    • Like Like x 1
    • Funny Funny x 1
  10. tcbandituk

    tcbandituk TC
    Subscriber

    Apr 8, 2016
    2,858
    1,000
    Reading
    #10 tcbandituk, Jul 3, 2023
    My 800XRt used to scrape the pegs all the time.
    Cured it when I fitted a decent rear shock set up for my weight, they still scrape when pushing on but only very occasionally now...
     
    • Like Like x 2
    • Useful Useful x 1
    • Love You Love You x 1
  11. Mongoose

    Mongoose Well-Known Member

    Feb 19, 2023
    83
    68
    Georgia
    #11 Mongoose, Jul 3, 2023
    I thought a right wanker was a British wrench?????? The Mad Mongoose.....OUT!!!!!
     
  12. steve lovatt

    steve lovatt Something else

    May 12, 2014
    9,230
    1,000
    North Yorkshire
    #12 steve lovatt, Jul 5, 2023
    Yeah but you're a bloody hooligan!
    I broke the feeler thing off my Tiger 800 - when it fell over on my drive :joy::joy:
     
    • Funny Funny x 3
    • Like Like x 1
Loading...
Similar Threads - Scraping Pegs Scary
  1. PeteZ

    Scrambler Scrambler 1200 Scraping Pegs

    PeteZ, Jan 28, 2019, in forum: Thruxton, Scrambler & Trident
    Replies:
    57
    Views:
    9,808
    Bret Morey
    Jun 30, 2019
  2. Ashlander

    Oscillating Scraping Noise Coming From Front Pulley Area

    Ashlander, Mar 28, 2021, in forum: Thunderbird
    Replies:
    13
    Views:
    5,199
    Alatamoc
    Apr 11, 2021
  3. Clunkie66

    1050rs Pillion Pegs And Hangers

    Clunkie66, Apr 20, 2025, in forum: Speed Triple
    Replies:
    3
    Views:
    450
    Boothman
    Apr 25, 2025
  4. DJ_DC

    Diameter Of Detente Ball - T120 Passenger Footpegs

    DJ_DC, Jan 25, 2025, in forum: Technical Help
    Replies:
    6
    Views:
    661
    DJ_DC
    Jan 27, 2025
  5. Jim_M1988

    Wtb Thruxton 1200s 2016 Dual Seat And Pillion Pegs

    Jim_M1988, Aug 5, 2024, in forum: Parts, Accessories & Clothing
    Replies:
    0
    Views:
    245
    Jim_M1988
    Aug 5, 2024

Share This Page

Sign up