Thruxton R Paddock Stands Uk Dilemma

Discussion in 'Technical Help' started by timboo, Dec 2, 2021.

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. timboo

    timboo Senior Member

    Oct 17, 2021
    271
    113
    Cambridgeshire
    On face value sounds like an easy decision. I was going to purchase a couple of the Oxford premium stands or the big black stands however I stumbled on several reviews of the big black on Halfords which claim the stands buckled and bike subsequently fell.
    At this point I checked what the max capacity for the stands is vs the weight of my bike. Turns out stand is 200kg.
    The Thruxton R is 203.2kg dry.
    Taking into account oil and fuel its easily 220kg.
    Whilst the bike is being lifted at 2 points I’m unsure what forces will act where.
    My old r6 was over 10kg lighter and I used billy basic stands for it. My intention is to leave my Thruxton on them over winter. Am I over thinking this or should I genuinely look for a stronger alternative if so which ones?
     
  2. Adie P

    Adie P Crème de la Crème

    Jul 7, 2018
    3,620
    1,000
    MID DEVON
    I'm a BIG fan of 1Jac stands and have posted elsewhere on this forum about them. Nope, I'm NOT a brand ambassador or salesperson; I'm not paid by them and I don't get any freebies of any kind ... I just think - no, I know - their product is a first class, well designed, well made (in England/Britain) piece of kit that will fulfill a number of possible uses in one package that won't cost the earth. The 1Jac will lift the complete bike clear of the ground AND enable full mobility and safety while it's on there.

    I don't know whether or not they've yet developed a fitting kit for a Thrucky but they have a 'phone number and they're in this country so you can actually 'phone and speak to someone - heck, you might even end up speaking to the business owner/product designer/maker. And don't worry about the weight - these things will lift bikes like a Hayabusa so, assuming a kit is available, your Thruxton will be a piece of the proverbial.

    There's a long and salutary story behind the reason that the 1Jac isn't patented and, hence, why cheap copies are available but stick with the original - they are, in my experience, far better made and finished and fully (lifetime) guaranteed by the maker.

    A 1Jac will cost you a bit more than two basic paddock stands but the additional functionality, convenience and quality are more than worth the extra cost.

    My 2p. ;)
     
    • Like Like x 1
  3. Ducatitotriumph

    Ducatitotriumph Crème de la Crème

    Apr 25, 2019
    2,181
    1,000
    Rothwell
    Stronger ones. Surely everyone sits on their bikes on the stands?
    And, twist the throttle and operate clutch and brake levers at the same time?
    Whilst making vroom noises in their head?
     
    • Funny Funny x 3
  4. Adie P

    Adie P Crème de la Crème

    Jul 7, 2018
    3,620
    1,000
    MID DEVON
    Only in a showroom ....... :)
     
  5. TheBeardedPunk

    TheBeardedPunk Senior Member

    Oct 7, 2021
    1,009
    243
    Belgium
    Keep in mind that you should about half the weight of the bike. You will only lift the back, so if the bike weighs about 220KG, a 200KG paddock stand should be just fine.
     
  6. andyc1

    andyc1 Lunarville 7, Airlock 3

    Feb 4, 2017
    2,858
    1,000
    N. Ireland
    Be aware the bobbins are mounted very low on the thruxton. Try to get a shorter stand if you can, taller ones make it a hard and unnerving lift
     
  7. timboo

    timboo Senior Member

    Oct 17, 2021
    271
    113
    Cambridgeshire
    I wish to lift both ends off the ground to protect the tyres.
     
  8. timboo

    timboo Senior Member

    Oct 17, 2021
    271
    113
    Cambridgeshire
    Would u happen to know which brands compliment this?
     
  9. timboo

    timboo Senior Member

    Oct 17, 2021
    271
    113
    Cambridgeshire
    Cheers nice concept wish i had more space to accommodate one of those ah well
     
  10. andyc1

    andyc1 Lunarville 7, Airlock 3

    Feb 4, 2017
    2,858
    1,000
    N. Ireland
    I don't I'm afraid. And I don't think I've ever seen a paddock stand with height being mentioned in the add. I had a cheap one off ebay that luckily enough was pretty short and suited the thruxton. I have another more expensive Harris one, by comparison its a fair bit taller. Lifting the thruxton on that was near impossible because of the initial leverage required. Didn't feel safe at all.
     
    • Like Like x 1
  11. timboo

    timboo Senior Member

    Oct 17, 2021
    271
    113
    Cambridgeshire
    Thanks for the info on the Harris stand it was another one I also looked at. Good job I am going the bike show this weekend. It is a question I shall pose to the Triumph stand I think.
     
  12. timboo

    timboo Senior Member

    Oct 17, 2021
    271
    113
    Cambridgeshire
    At time of typing I am sat in the Whetherspoons at the NEC and purchased a set of MotoGP 1 piece paddock stands. They weigh a ton and have been advised they will do the job so happy days. Just need to lug them on the train and test them. Will post a futher update should they be a good fit for the thruxton.
     
    • Like Like x 2
  13. timboo

    timboo Senior Member

    Oct 17, 2021
    271
    113
    Cambridgeshire
    I appear to have a further dilema. The genuine triumph instructions for their bobbims suggests 24Nm torque.
    The hex bolts state 10.5 on them. Is this a misprint in the instructions as 24Nm feels high high.

    DB9D5086-F18F-48F2-A919-9E85211DA8F0.png
     
  14. Col_C

    Col_C I can't re...Member

    Aug 5, 2015
    1,433
    800
    Cornwall
    #14 Col_C, Dec 6, 2021
    Last edited: Dec 6, 2021
    If you mean what's stamped on the head of the bolt then that is the tensile strength of the bolt, completely different to torque that you're applying (and different units).
    10.9 (not 10.5) is the standard marking for higher strength fasteners.
    So you should be fine following the Triumph instructions.
     
    • Informative Informative x 2
    • Like Like x 1
  15. timboo

    timboo Senior Member

    Oct 17, 2021
    271
    113
    Cambridgeshire
    Thanks for your help much appreciated. On my mountain bike my manufacturer actually puts the Nm values on most bolts so you know what they should be at, which is where my confusion came from.
    For my own future reference does the tensile strength of the bolt ever correlate in any way shape or form to the Nm values?
     
  16. Notso

    Notso Senior Member

    Dec 17, 2018
    624
    243
    Solihull
  17. Col_C

    Col_C I can't re...Member

    Aug 5, 2015
    1,433
    800
    Cornwall
    No (they are related but never the same). :)
    Completely different units, strength is MPa, torque Nm (like comparing apples and pears)
    It only tells an engineer the minimum strength specification of the material that the fastener is manufactured from. Which could be of many materials in each grade (e.g. high carbon steel, stainless steel, titanium alloy etc). Common strength grades (weaker to stronger) are 8.8, 10.9 & 12.9.
    Added to this obviously the recommended torque for a given grade will vary depending on its physical size.
    Examples for 10.9 grade: M6 bolt - max. torque = 17Nm, M10 bolt - max. torque = 82Nm
    8.8 grade M10 bolt - max torque = 57Nm
     
    • Useful Useful x 3
  18. timboo

    timboo Senior Member

    Oct 17, 2021
    271
    113
    Cambridgeshire
    Right so lets start with the positive news.

    Bobbins attached at 24Nm
    Rear paddock stand works fine albeit i think a longer handled stand would be better for extra leverage

    Next the not so positive news

    The front paddock stand is too narrow. I cant get it past the discs. I thought this would be a kind of generic thing obviously not.
     
  19. timboo

    timboo Senior Member

    Oct 17, 2021
    271
    113
    Cambridgeshire
    Well this has been fun. Ordered a different paddock stand today following a chat with Triumph UK customer service/technical they said they use Pro Bike stands based in Northampton

    https://probike.co.uk/lifts-stands/paddock-stands/front-headstock-stand

    The headstock stand looks far more sturdy and superior than the ones, which lift from the bottom of the forks.
    I suppose you live and learn.
     
    • Like Like x 2
    • Useful Useful x 1
  20. Col_C

    Col_C I can't re...Member

    Aug 5, 2015
    1,433
    800
    Cornwall
    Yes, headstock stand every time. Much more secure and enables any work on front axle, wheel, brakes and can even remove the fork tubes if you need.
     
    • Agree Agree x 2
    • Like Like x 1
Loading...

Share This Page