No Start After Accident

Is there anything i can do? Since there are no dealers here
What should i check?
Any safety switch ?
Thanks guys

 

Hi victor,
We definitely need more information about what you have done and even what bike you have?
I'm afraid that there's no details to go on so please provide and then you may get the help you are searching for.

 

Basically just repair paint. And buy new body parts. The bike is 675 triump 2013
3 cylinders
Please ask me whatever info need

 

I'm confused?
Your request was for assistance as it wouldn’t start?
if you are after parts, ebay.

 

Assist because it wont start.
Parts no i dont need. I bought all i need
Actually the accident only damage the body kit parts.
Nothing really major

 

Have you checked your KILL switch ?

 

Hi Victor,
By start is it turning over but not firing, or nothing at all when you hit start button?

We need more information to help.

 

If Kill switch is ok try:
Sidestand switch
Clutch lockout switch

 

Did not crank sir.

 

Ok i will defenetly check them
Is there any diag scan tool for this bike ?

 

Most use TuneEcu you will need a lead

 

Tilt switch

 

Yes you have a tilt switch at the front around the headlight make sure it is in the right position and reset as well as the other bits. Do check the oil level. Welcome to the family by the way.
Joe.

 

Thanks i will check that also

 

Where its located and what its look like ?

 

Yeah thanks for welcoming me. I will never sell this bike. Love it.
Can you help me with the diagram and tech?
Where is the tilt level and how to reset it

 

Ok update.. bike cranking
I have ignition and spark but injectors did not fired.

 

What did you do to get the bike cranking ?

 

Making progress now. Check fuel filter as gunk in the tank may have been dislodged by the accident.

 

when you switch on the ignition is the pump pressurising the fuel rail