Tiger 900 Gt Tail And Stop Light Wires

Discussion in 'Technical Help' started by azokie, Jan 7, 2021.

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. azokie

    azokie New Member

    Oct 23, 2020
    10
    3
    Oklahoma
    I want to install an aux tail light/stop light and turn signal light on my Tiger 900 gt pro. Like the Admore Light Bar. To do so, I need access to tail light and stop light wires. Anyone have pictures or information on how to access the respective wires?
     
    • Like Like x 1
  2. Hamish

    Hamish New Member

    Nov 8, 2020
    21
    3
    Selkirk, Scottish Borders
    Azoki,

    Lift off the passenger seat and the wires are in front of you.

    Stop tail is a 3 wire plug (black + 2 other colours).

    Indicator wires are the two, two wire cables on each side of the stop tail plug. Try them in turn. Disconnect a plug try the light to see if it works (e.g. disconnect the 3 wire stop/tail) if it doesn't then you have proved what that connection is.
    I use the tail light wire, which is a switched live wire, to trigger a power distribution relay.

    Hope that helps.

    Hamish.
     
    • Like Like x 4
  3. azokie

    azokie New Member

    Oct 23, 2020
    10
    3
    Oklahoma
    Harnish. Great info. I saw that black plug but it did not have enough wires, in my opinion, to be stop light and tail light and turn signals. But I read that the turn signal (indicators) are along side so I will have detailed look. I think I will lift the tray so I can get a better view and have some room to work the plugs. Thanks again. AZOKIE

     
    • Like Like x 1
  4. azokie

    azokie New Member

    Oct 23, 2020
    10
    3
    Oklahoma
    Another question. My dealer says that the 2020+ 900 gt pro has some low voltage circuits protected by a linbus--similar to canbus (like in BMW). Usually when there is some form of ECU (computer assisted voltage protection like in BMW) there will not be a fuse. The Tiger 900 has fuses for the stop light (brake light) and indicators front and rear. That indicates to me that the brake light and indicators are not protected by a low voltage linbus. Any comment concur or not. I do not want to tap into the wires and cause a fault. AZOKIE
     
  5. Ducatitotriumph

    Ducatitotriumph Crème de la Crème

    Apr 25, 2019
    2,181
    1,000
    Rothwell
    Get a hire bike, take it home and perform surgery on it to test!!!??? ;);):):)
     
    • Funny Funny x 1
  6. dilligaf

    dilligaf Guest

    I had a 2018 Speedmaster that was supposed to be fitted with canbus/linbus or something :confused:
    I made a tow bar for it and had to tap into the rear lights and indicators to power the lights on my trailer :)
    Never had any problems with any electrical systems after doing it :)
     
    • Like Like x 1
    • Informative Informative x 1
Loading...

Share This Page