I wanted to get CRG lane splitter mirrors for my new T120 but they are not hollow bars. Anyone found any mirrors that can just go on without major work.?They do need to fold in though to get my bike in my shed!
I have a set of the CRG's on my T120. And I can not recommend them enough, they are tremendous. Fit and finish are great. The image is crystal clear. And they look great. No trouble fitting them. The bars have a threaded block in them, unscrew the cap. Make sure you buy the bushing kit with a longer screw. Mount the bushing - I fit the cover back over the exposed end but I have seen guys do other things. Screw it down I used a little locktite. It took 10 minutes and I mounted one backwards and had to redo it, '
Hi Roy, Thanks for the reply. I almost got used to my Micky Mouse stock mirrors but I know I would prefer the CRGs. However - what year is your T120? The end of my bars are not hollow and apparently it is really hard to remove , making installation really difficult!
Gris I have a 2017 T120. Yes the bars are not quite solid there is an insert that the silver cap screws into. I took that cap off and got a kit with a longer screw and a set of adapters from CRG. Replaced the screw that was on the bike with a longer screw - put the silver cap on then the adapter. I believe it was a the CRG Billet internal adapter. I got it from Revzilla they are local to me and have everything in stock. I know you can find elsewhere. Here is the linkhttps://www.revzilla.com/motorcycle/crg-billet-internal-adapter-for-crg-bar-end-mirror I cut off the extension which goes into the handlebar and put it all together. I am very happy with the results. i know some guys were using all sorts of things and even breaking out the inserts that were in the handlebar. I don't like to destroy components on the bike if I can do it without. Turned out fantastic!
looks good Triumph can make things a PITA, prolly to sell their bolt-ons first but eventually the aftermarket catches up. looking at the stainless bar end mirrors from Halycon, they may be the ones!!