Tiger Sport 2017 Engine Cuts Out At High Revs. Help Needed

Discussion in 'Technical Help' started by t_revs, Nov 4, 2019.

  1. t_revs

    t_revs New Member

    Aug 4, 2019
    3
    3
    Southampton
    #1 t_revs, Nov 4, 2019
    Hi All
    Need some help.
    I recently bought a 2017 Tiger Sport with 8000 miles on the clock.
    It has recently developed an engine cut out problem at mostly above 6000rpm and above 90mph.
    Usually in 5th or 6th and under load. Its only for a fraction of a second, but its like hitting a brick wall at speed.
    Only trouble is it is intermittent, one day I can go for a ride and no problem. The next day it will cut out, misfire
    at above 6000rpm.
    So I've connected up TuneEcu but no codes are shown.
    The Tiger1050 Forum recon it is the sidestand switch but surely if it was the switch it wouldn't be intermittent.
    Anyone come across this on the 1050 triple motor before?

    Cheers
     
    • Agree Agree x 1
  2. Eldon

    Eldon Elite Member

    Nov 14, 2018
    7,083
    800
    North Yorkshire
    #2 Eldon, Nov 4, 2019
    To prove either way without any expense can't you just create a little bypass cable and substitute it for the switch. Test ride and check the result!

    Just be more mindful that the stand is retracted when you set off if you do.
     
    • Like Like x 2
    • Agree Agree x 1
  3. t_revs

    t_revs New Member

    Aug 4, 2019
    3
    3
    Southampton
    #3 t_revs, Nov 4, 2019
    Yeah good idea Eldon. I had thought of that but but wondered if it was a known problem. I did gently push the stand down at about 100mph but it felt like a different cut out to my problem.

    Cheers
     
    • Agree Agree x 1
  4. Callumity

    Callumity Elite Member

    Feb 25, 2017
    3,359
    800
    Nr Biggar
    #4 Callumity, Nov 4, 2019
    These switches all benefit from servicing with a blast of WD40 and re-sealing with silicone (Di-electric) grease.
     
    • Agree Agree x 3
  5. joe mc donald

    joe mc donald Joe
    Subscriber

    Dec 26, 2014
    14,884
    1,000
    slough / burnham
    #5 joe mc donald, Nov 4, 2019
    t_revs
    I found the cure. Stay at 5000 revs and 80mph sorted. But yes could be your switch possibly the side stand vibrating a little and sending cut out signals. How tight is your stand and spring.
    Regards
    Joe.
     
    • Agree Agree x 1
  6. t_revs

    t_revs New Member

    Aug 4, 2019
    3
    3
    Southampton
    #6 t_revs, Nov 4, 2019
    OK thanks for that, guess I'll go through all the switches with WD40, at least thats an easy operation..
     
    • Like Like x 1
    • Agree Agree x 1
  7. t_revs

    t_revs New Member

    Aug 4, 2019
    3
    3
    Southampton
    #7 t_revs, Nov 4, 2019
    Also tried keeping below 6000rpm but my brain just couldn't do it....stand is tight and spring is tight, will try bypassing the sidestand switch and tip sensor if I can find it...
     
    • Agree Agree x 1
  8. stevethegoolie

    stevethegoolie Elite Member

    Oct 16, 2014
    2,456
    800
    East Riding of Yorkshire
    #8 stevethegoolie, Nov 4, 2019
    Just do one thing at a time, that way you may save some work (first time lucky?) and, if you bypassed or substituted 2 or more components, how would you know which one was causing the problem?
     
    • Like Like x 3
    • Agree Agree x 3
  9. mcant1050

    mcant1050 New Member

    Feb 12, 2022
    0
    1
    İstanbul
    #9 mcant1050, Feb 12, 2022
    Hello mate,

    did you resolve the problem? Was it the side stand sensor? I have the same issue and no idea whats going on with my tiger 1050.
     
    • Agree Agree x 1
  10. Goodygixxer

    Goodygixxer Member

    Apr 23, 2020
    41
    13
    Southsea
    #10 Goodygixxer, Feb 12, 2022
    Sounds like you may have a blocked fuel filter
     
    • Useful Useful x 1
  11. Goodygixxer

    Goodygixxer Member

    Apr 23, 2020
    41
    13
    Southsea
    #11 Goodygixxer, Feb 12, 2022
    Sounds like you may have a blocked fuel filter.
     
    • Useful Useful x 1
  12. mcant1050

    mcant1050 New Member

    Feb 12, 2022
    0
    1
    İstanbul
    #12 mcant1050, Feb 12, 2022
    I don’t think so because the model of it 2020 and it has only 8500 km on the odo.

    the engine only cuts the ignition at 5th and 6th gear at rpms higher than 6000. Today it was extreme it kept on cutting the ignition like 6 times the bike almost lost traction.

    I’m really lost can’t find anything else on the forums about this.
     
    • Agree Agree x 1
  13. Yorkshireman

    Yorkshireman Crème de la Crème

    Dec 12, 2015
    3,400
    1,000
    Barnsley
    #13 Yorkshireman, Feb 13, 2022
    Don’t hold your breath waiting for a reply, the original poster hasn’t been seen for nearly two years.
    Sorry, I have no idea what could be causing your problem.
     
    • Agree Agree x 1
  14. Barry10502017

    Barry10502017 New Member

    Jul 6, 2024
    0
    0
    Australia
    #14 Barry10502017, Jul 6, 2024
    Hi All
    I'm having the same issues with 1050 sport 2017. I have replaced the fuel pump and even replaced the tank ( Tank had rust) . I have replaced sparks plugs and tested coils . No engine check errors any help would be appreciated , Cheers Barry
     
  15. Barry10502017

    Barry10502017 New Member

    Jul 6, 2024
    0
    0
    Australia
    #15 Barry10502017, Jul 6, 2024
    Hi All
    I'm having the same issues with 1050 sport 2017. I have replaced the fuel pump and even replaced the tank ( Tank had rust) . I have replaced sparks plugs and tested coils . No engine check errors any help would be appreciated , Cheers Barry
     
Loading...
Similar Threads - Tiger Sport 2017
  1. erwin tiger sport 1050

    Tiger Sport License Plate Holder Tiger Sport 2017

    erwin tiger sport 1050, Sep 23, 2024, in forum: Tiger / Explorer
    Replies:
    1
    Views:
    416
    Dustywheels
    Sep 25, 2024
  2. Mr Bond

    2017 Tiger Sport 1050 Pannier Fitting Instructions

    Mr Bond, Aug 22, 2022, in forum: Technical Help
    Replies:
    0
    Views:
    623
    Mr Bond
    Aug 22, 2022
  3. Mr Bond

    Wanted - Hard Luggage - 2017 Tiger Sport 1050

    Mr Bond, Dec 7, 2021, in forum: Wanted
    Replies:
    1
    Views:
    728
    Ducatitotriumph
    Dec 7, 2021
  4. pat mills

    Tiger Sport 2017 Wiring Diagram

    pat mills, Apr 17, 2019, in forum: Technical Help
    Replies:
    3
    Views:
    4,303
    pat mills
    Apr 29, 2019
  5. pat mills

    Tuning To Increase Power And Performance Tiger Sport 2017 -

    pat mills, Sep 6, 2018, in forum: Technical Help
    Replies:
    12
    Views:
    8,666
    pat mills
    May 9, 2019

Share This Page

Sign up