hi I have a 2019 speedmaster and think the indicators run to fast ,has anyone else had this ? Wots the fix plz thanks
Hi Vern, and welcome in Presuming the indicators are standard and not LED, and that all bulbs are working then it is likely to be a poor connection or bad earth I am a novice at this sort of thing though, someone with far more understanding than me will be along soon
Hi and welcome, did not have any problems with mine. I would take it back to the dealers if you are concerned..
Hi, have you confirmed that all of the indicators are working? My Street Twin front left indicator stopped working and it appeared from the speedo to be going quickly, could only tell that the indicator wasn't flashing from a view off the bike. I rummaged about with the connection and sprayed the electrics with dielectric spray then ACF50 and it all works fine again
Big Vern. Welcome to the asylum. Simple cure your bike usually runs 12/21watts Take the rear out and replace with 12/23watt job sorted. But first make sure you have all 12/21 in there to start with. We will need a picture of this steed so hit the upload a file button bottom right and feed us all here in the asylum. Regards & ride Safe. Joe.