Speed Triple Rs Service Manual.

Hi,

Looking at doing some self help on the bike. Does anyone know where I might get an online manual? The owners hand book doesn't go into much detail.

 

You can go direct to Triumph and you can for a monthly fee get the factory workshop manual.
It’s not cheap though.
I got a Haynes Manual for my Thruxton but it’s nowhere close to a factory one, but as a last resort it’s got enough to help

 

Cheers, why a monthly fee? How much, BTW

 

No idea why, contact your main agent and they’ll give you what you need.

 

Go here

https://www.tritun.net/tritun/vehicle/lookupForm

All the costs are there

I think it’s £6 for an hour, £36 for a day and so on

 

I got what I needed there.

 

Thanks, Just wanted to take the wheels off to get new tyres fitted. The local garage charge £40

 

The £40 is probably better as I say the Haynes Manual is adequate to work from

 

Is it easy to export the whole manual as a PDF or similar?
Always nice to have the manual not having to fork out £6 everytime just to find a NM value or feeling that you have to rush through things before the our has gone.

 

You can’t download the whole manual in 1 go. I paid £6 for the hour and downloaded 90% of all docs ( the ones I needed)

 

Ah ok, I don't mind paying for a 24 hours if i get the whole thing.
But do you download it in a PDF format, or export page by page?

 

Hi there,
I have posted in general discussions a link for the service manual . FOR FREE!
Not the owner one.
It's for the triple (not JUST rs, which i have) but good pdf file.
Enjoy!

 

Very nice of you to share.

 

I got the factory manual on CD off eBay for not a lot. Works fine

 

Does it cover the RS?

 

This is the one I bought https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/323770652086

 

Nope, this was for the Daytona.

I'm guessing since you have to log in to get access to it anything that's sold that's covering the later models is prob not legit.

 

Not sure what year this manual is for but I’m thinking pre 2018. I noticed the torque setting for the front spindle is different from the manual I downloaded for the VIN on my bike. For our bikes it is 65 NM not 110 NM. The brake calliper settings are a little different too. They are 55NM not 40NM. The rear axle was the same. I think the reason for the front wheel differences is probably because the rs has Ohlins forks and this manual is for whatever forks came on the pre 2018 model. The rest of the info should be fine though.

 

Thanks for the information as I have been putting 55nm on the front callipers. I’m going to set 40nm later. Guess I’m lucky not to have stripped’em!

 

What year and trim level is your bike?