Featured Starting problems and fixes

Discussion in 'Technical Help' started by crispey, Nov 12, 2015.

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. Sceptic Al

    Sceptic Al Well-Known Member

    Who's a clever boy then
    :)
     
  2. Sceptic Al

    Sceptic Al Well-Known Member

    Whether you call them Yanks, Spams, Septic (tanks), Uncle Sam's or whatever other nickname IMHO Americans are general OK chaps/chapess's, well, the one's I've worked with were. Of course, there's always exceptions and the odd total 'hand cranker' amongst them.
     
    • Like Like x 2
  3. PETER CLARKE

    PETER CLARKE Senior Member

    Nov 11, 2015
    301
    120
    Essex
    Heard any more back about CDI test Al
     
  4. Sceptic Al

    Sceptic Al Well-Known Member

    Hi Pete.
    Got an email from Carmo Electronics, not very promising by the sounds of it. Loads of 'we might not be able to fix it' blah blah, I don't think they too interested in a fix and only want to flog me a new one and for the price they are asking it'd be more worthwhile getting an original one from my local Triumph stealer so I'll probably get a Fire Start from Triumph Twin Power. ;)
     
    • Like Like x 1
  5. PETER CLARKE

    PETER CLARKE Senior Member

    Nov 11, 2015
    301
    120
    Essex
    That's a bugger, but you won't mind forking out if it is a cure, everything crossed and good luck,perhaps when both units are off bike you might want to do some electrical measurements and post them on here what is expected on and new one and what the faulty unit readings were, might be very useful info if someone else has a similar fault, keep us posted Al.
     
  6. Sceptic Al

    Sceptic Al Well-Known Member

    Sure will when I get the bugger fettled
     
    • Like Like x 1
  7. mixifix

    mixifix Active Member

    May 7, 2013
    108
    43
    mansfield
    Now chaps titter you may but after having tank off to take cam cover off & cams to tighten head bolts to cure leak at head gasket,put all back together plus timing cover on. Push button whirl bang fire then stopped,been in garage found trapped petrol pipe put right push button bang runs a treat. Lesson to be learnt,many thanks happy rides to be had.
     
  8. crispey

    crispey crispey creme de la creme

    Nov 6, 2014
    7,198
    1,000
    Uk
    Bump , due to increase of members with starting probs.
     
  9. Sprinter

    Sprinter Kinigit

    Aug 17, 2014
    6,026
    1,000
    uk
    can we stickie this?
     
  10. Rocketman22

    Rocketman22 New Member

    Aug 23, 2019
    0
    1
    Ashford
    #50 Rocketman22, Aug 23, 2019
    Last edited: Aug 23, 2019
    I have a starting issue especially when the bike is hot, she turns over fine no battery problems, she just won't fire up, wiggled wires on, off, on, off then after quite a few turnovers she starts up, oh yeah hi all ex rocket 3 owner, needed sumit lighter.
     
  11. Rocketman22

    Rocketman22 New Member

    Aug 23, 2019
    0
    1
    Ashford
    I have a starting issue especially when the bike is hot, she turns over fine no battery problems, she just won't fire up, wiggled wires on, off, on, off then after quite a few turnovers she starts up
     
  12. Helmut Visor

    Helmut Visor Only dead fish go with the flow
    Subscriber

    Oct 3, 2018
    6,100
    800
    Three Counties
    Hi Rocketman, and welcome in :cool::cool:
    If you're an ex Rocket 3 owner then you'll need to give people a clue what bike the problem is on ;);)
     
    • Agree Agree x 1
  13. sprintdave

    sprintdave Nurse,he's out of bed again

    May 25, 2014
    1,495
    750
    Birmingham
    And in the appropriate forum might help
     
    • Agree Agree x 1
  14. lludovic

    lludovic New Member

    Feb 25, 2023
    3
    3
    Richmond
    Bike wasn’t starting and then changed the adjustable clutch lever and it started again -guess it was loose?
     
  15. Ducatitotriumph

    Ducatitotriumph Crème de la Crème

    Apr 25, 2019
    2,181
    1,000
    Rothwell
    There's a switch on the clutch lever so chances are it wasn't activated or it's sticking. That will disable the starting.
     
    • Informative Informative x 1
Loading...

Share This Page