2009 Tiger 1050 with 29'000 miles

Discussion in 'Technical Help' started by Manny Buttigieg, May 25, 2015.

  1. Manny Buttigieg

    Manny Buttigieg New Member

    May 25, 2015
    1
    1
    Lincoln
    #1 Manny Buttigieg, May 25, 2015
    Hi Everyone

    Does anyone have mileage as I have on their tiger? Just the other day I was stuck in traffic for around an hour and started to experience issues disengaging gears and knocking into neutral. Since owning the bike selecting gears has always been quite noticeable, bike jumping forward and once in gear you can feel it, chain would snatch, changing through the gears was has always been as if the gear box has no synchronised gearing.

    I purchased the bike with 7'000 miles and now I'm at 29K and the gear selection is more fierce than before. `i'm debating if I should bite the bullet and replace the friction plates, springs and cabling. Any tips on type of manufacturer I should use or stick to triumph OEM parts? Is there any tips I can try before going in deep replacing parts mentioned earlier?

    Look forward to your replies.

    Thanks

    Regards

    Manny
     
  2. sprintdave

    sprintdave Nurse, think it's time for his medications.
    Subscriber

    May 25, 2014
    1,627
    750
    Birmingham
    #2 sprintdave, May 25, 2015
    Last edited: May 25, 2015
    it is possible it is an oil issue, some oils are more prone to this problem than others. I know a lot of guys have had success by cleaning the original plates and changing the oil on their Triumphs ( not just Tigers),Motul 7100 seemed a popular choice. Check your clutch cable free play is correct and check gearbox oil level, the Sprint guys say it helps.
    Also is the chain adjusted correctly as this would make a difference too, maybe you have a badly stretched chain with tight spots. I would check the simple things out first mate before you go buying stuff
     
  3. roadrider

    roadrider First Class Member

    Jul 26, 2013
    1,003
    500
    Oxon
    #3 roadrider, May 25, 2015
    I'd agree with sprintdave,check the simple stuff first.
    Clutch cable might be worth having a look at as well,just to check it not streched.
    Mine's fairly sensitive to chain adjustment,if it's a bit slack you'll feel it in the gears first.
     
  4. Manny Buttigieg

    Manny Buttigieg New Member

    May 25, 2015
    1
    1
    Lincoln
    #4 Manny Buttigieg, May 26, 2015
    Thanks Sprintdave
    I will check the cable adjustment, chain and oil levels today. Just to let you know I use MOTUL V300.

    Appreciate the advice.
     
  5. Manny Buttigieg

    Manny Buttigieg New Member

    May 25, 2015
    1
    1
    Lincoln
    #5 Manny Buttigieg, May 26, 2015
    Thanks road rider,
    Hopefully the advice you guys have offered will do the trick? Incidentally does anyone know how many miles the original clutch could achieve? I know this is very dependant on how you ride, town work or open road, just as an average?
     
  6. Keith Inglis

    Keith Inglis Member

    Feb 17, 2015
    18
    18
    Kings Lynn
    #6 Keith Inglis, May 26, 2015
    my 1992 trophy 900 has done 55000 miles on the original clutch and when I striped it to replace the sprag clutch it looked fine so it went back, I assume it would be the same clutch plates as on your tiger ? I also know somebody who has 72000 on there Triumph original clutch.
    Keith.
     
  7. Manny Buttigieg

    Manny Buttigieg New Member

    May 25, 2015
    1
    1
    Lincoln
    #7 Manny Buttigieg, May 26, 2015
    Thanks thats answered the question then. Just readjusted the cable and although it seems better I'm not convinced I've sorted it out. Since having this bike the clutch has always been a problem. We will see, once I can put some miles on it I can see if the adjustment has worked, Failing this it will need to be strip, review, soak and rebuild. Hopefully the pin that actually pulls the clutch assembly has the correct recess to allow enough oil to get through?

    Thank you again for the information, appreciated.

    Regards

    Manny
     
  8. Keith Inglis

    Keith Inglis Member

    Feb 17, 2015
    18
    18
    Kings Lynn
    #8 Keith Inglis, May 26, 2015
    It also might that the plates are not moving correctly in the basket i.e. bured or stepped, it is not a big job to have a look and check them out,
    good luck and let us know what you find if anything :)
    Keith
     
  9. Manny Buttigieg

    Manny Buttigieg New Member

    May 25, 2015
    1
    1
    Lincoln
    #9 Manny Buttigieg, May 26, 2015
    Thanks Keith it looks pretty straight forward other than having to purchase 3 gaskets getting the clutch housing exposed and removed but heh, cheaper than taking it down to triumph!! I will let you know how I get on.
    Regards
    Manny
     
  10. Keith Inglis

    Keith Inglis Member

    Feb 17, 2015
    18
    18
    Kings Lynn
    #10 Keith Inglis, May 26, 2015
    Manny if you are careful removing the cover ect you can use the same gaskets with a light smear of hylomar on refit just the once :)
     
Loading...
Similar Threads - 2009 Tiger 1050
  1. billyandmollysdad

    2009 Triumph Tiger 1050 Se Now Sold

    billyandmollysdad, Apr 25, 2024, in forum: Bikes for Sale
    Replies:
    0
    Views:
    501
    billyandmollysdad
    Apr 25, 2024
  2. billyandmollysdad

    Looking For 2009 Tiger 1050 Luggage Rack And Mounting Kit

    billyandmollysdad, Mar 23, 2024, in forum: Wanted
    Replies:
    0
    Views:
    428
    billyandmollysdad
    Mar 23, 2024
  3. Clint Prior

    Spoke Rims For A 2009 Tiger 1050

    Clint Prior, Mar 11, 2021, in forum: Triumph General Discussion
    Replies:
    5
    Views:
    1,436
    Iceman
    Apr 11, 2021
  4. Scotty Dog

    2009 Tiger 1050 Battery Drain Woes

    Scotty Dog, Dec 6, 2018, in forum: Technical Help
    Replies:
    30
    Views:
    8,227
    mglemans86
    Dec 21, 2018
  5. Edward Rackemann

    2009 Speed Triple Spluttering Under Acceleration

    Edward Rackemann, May 4, 2024, in forum: Technical Help
    Replies:
    4
    Views:
    606
    pepkoakrapovik
    May 7, 2024

Share This Page

Sign up