Bottom cooling hose replacement??

Discussion in 'Daytona' started by Antrats73, Aug 24, 2014.

  1. Antrats73

    Antrats73 Member

    Jan 7, 2014
    15
    8
    #1 Antrats73, Aug 24, 2014
    Hi all just after a bit of advice, I've had a leak on my Daytona 600 and managed to trace it to the bottom cooling hose that go's from the radiator to the water pump it's been seeping from above where the jubilee clips are I think it's just the rubber getting old?? My question is could I replace it with a straight piece of hose with the same diameter ect just make it a bit longer so as not to kink the pipe?? Or do I have to get the original slight moulded oem part?? Which will be a lot more expensive thanks in advance!!
    image.jpg

    image.jpg
     
  2. Antrats73

    Antrats73 Member

    Jan 7, 2014
    15
    8
    #2 Antrats73, Aug 29, 2014
    image.jpg
    We'll see how this holds up, made it slightly longer so as not to kink!!

    image.jpg
     
  3. SteveJ

    SteveJ Super Moderator

    Aug 12, 2013
    524
    113
    North Hampshire
    #3 SteveJ, Aug 31, 2014
    If it work then no worries just keep an eye on it and it should be all good. :upyeah:
     
    • Like Like x 1
  4. Antrats73

    Antrats73 Member

    Jan 7, 2014
    15
    8
    #4 Antrats73, Aug 31, 2014
    Been on a long ride today and up to now seems ok so fingers crossed!!
     
    • Like Like x 1
  5. GladImbackontwowheels

    GladImbackontwowheels New Member

    Sep 26, 2014
    12
    3
    Dover Kent
    #5 GladImbackontwowheels, Sep 28, 2014
    Have to say, whenever a problem pops up like that, I take the opportunity to make everything nice. I would get the proper hose and a couple of nice shiny S/S clips and do the job proper like. I will also do any little niggly jobs in the area I'm working, like a tie wrap here or a missing screw there then slowly everything gets perfect, or nearly anyway! :upyeah: (that's assuming you can afford the original part, no offence meant otherwise :wink:).
     
    • Like Like x 1
  6. KLINK

    KLINK Member

    Sep 16, 2014
    17
    8
    Brize Norton
    #6 KLINK, Sep 29, 2014


    Looks like washing machine cold feed hose? Only messing.:wink: Looks like just the job.
    Not like anyones going to see it. Like SteveJ say's keep an eye on it should last well.:upyeah:
     
    • Like Like x 1
  7. Antrats73

    Antrats73 Member

    Jan 7, 2014
    15
    8
    #7 Antrats73, Oct 6, 2014
    Haha thanks guys, I bought and fitted the original part about 2 weeks ago cost me £32 posted from world of triumph just played on my mind not being the proper part so took the plunge, the blue pipe seemed fine though but you never know!!
     
    • Like Like x 1
  8. GladImbackontwowheels

    GladImbackontwowheels New Member

    Sep 26, 2014
    12
    3
    Dover Kent
    #8 GladImbackontwowheels, Oct 6, 2014
    :upyeah:
     
Loading...
Similar Threads - Bottom cooling hose
  1. David Cooper

    Bit Early But, From The Bottom Of My Heart, To All Of You.

    David Cooper, Dec 18, 2023, in forum: Lounge
    Replies:
    9
    Views:
    1,420
    Woodtickgreg
    Dec 25, 2023
  2. Rob Taylor

    Vintage Tiger 955 Soggy Bottom

    Rob Taylor, Dec 14, 2022, in forum: Tiger / Explorer
    Replies:
    7
    Views:
    1,818
    Rob Taylor
    Apr 18, 2023
  3. Rob Taylor

    Tiger 955 Soggy Bottom

    Rob Taylor, Dec 12, 2022, in forum: Technical Help
    Replies:
    0
    Views:
    344
    Rob Taylor
    Dec 12, 2022
  4. DaveB

    Soggy Bottom! '09 Se

    DaveB, Oct 31, 2019, in forum: Bonneville
    Replies:
    5
    Views:
    860
    DaveB
    Nov 1, 2019
  5. Triton1960

    Tapping Noise From Bottom End Of T110

    Triton1960, Sep 4, 2019, in forum: Vintage Classics
    Replies:
    5
    Views:
    1,852
    darkman
    Sep 6, 2019

Share This Page

Sign up