Tons Of Bits For Sale - 1992 Sprint / 1998 Trophy

Discussion in 'Parts, Accessories & Clothing' started by Thorcusmodee, Jul 23, 2018.

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. Thorcusmodee

    Thorcusmodee Well-Known Member

    Jun 2, 2018
    175
    93
    Boston, Lincs
    Hi Folks, I have most parts for a 1992 sprint, a complete set of bodywork for a 1994 sprint and most parts from a 1998 Trophy, including full body panel set and a set of genuine Triumph luggage in blue. I don't have the Trophy engine - it's kernackered but I do have most other bits. If anybody wants anything give me a shout, I will sell at ebay prices minus 10%. I can post most stuff to UK at buyer's cost. Admins - I hope this is ok, if not please message me, I don't want to upset any apple carts.
     
  2. Zak

    Zak Member

    Feb 3, 2018
    21
    8
    Leek
    Hiya, do you have a bank of carbs for a 1996 trophy 900.
     
  3. Thorcusmodee

    Thorcusmodee Well-Known Member

    Jun 2, 2018
    175
    93
    Boston, Lincs
    Hi Zak, I have a set of 3 Kei Hins available. I can do them for £150 plus post. Regards, Dave.
     
  4. STIFFLER

    STIFFLER Senior Member

    Jan 27, 2015
    587
    143
    Shropshire
    Hey up mate,How much will you want for the petrol tap if I cant fix what ive got lol
     
  5. Zak

    Zak Member

    Feb 3, 2018
    21
    8
    Leek
    My trophy was running mikuni carbs, I assume the kei hins would be set up for an earlier bike and run without problems ?
     
  6. Zak

    Zak Member

    Feb 3, 2018
    21
    8
    Leek
    Don't know what DD's reply was about, what's of interest !!
     
  7. Oldyam

    Oldyam Grumpy Old Git

    May 14, 2017
    613
    500
    ireland
    DD was letting us know about this thread in case it was of interest.
     
  8. Zak

    Zak Member

    Feb 3, 2018
    21
    8
    Leek
    Sorry I really do have to wake up. Ha ha
     
  9. Thorcusmodee

    Thorcusmodee Well-Known Member

    Jun 2, 2018
    175
    93
    Boston, Lincs
    I'm pretty sure the Mikunis have a different size on the inlet side so your air filter wouldn't fit the Keihins. The two set ups are interchangeable, they use the same throttle and choke cable and are the same size on the engine side but Im fairly certain they are different on the air filter side.
     
  10. Zak

    Zak Member

    Feb 3, 2018
    21
    8
    Leek
    Thanks for the info, maybe I will try to get a set of mikuni carbs as that was what was fitted as standard, the right hand side carb is the problematic one, the centre and left hand side are good.
    just purchased another trophy on thursday, insured, MOT'd and taxed it yesterday, taking it a ride out today.

    IMG_20180818_130512.jpg
     
    • Like Like x 2
  11. Oldyam

    Oldyam Grumpy Old Git

    May 14, 2017
    613
    500
    ireland
    Air filter box is the same the difference is in the airbox to carb & carb to head rubbers for the two sets of carbs
     
    • Thanks Thanks x 1
  12. Thorcusmodee

    Thorcusmodee Well-Known Member

    Jun 2, 2018
    175
    93
    Boston, Lincs
    That sounds right. Cheers.
     
  13. Thorcusmodee

    Thorcusmodee Well-Known Member

    Jun 2, 2018
    175
    93
    Boston, Lincs
    That looks rather nice. I am now left with a complete trident, a soon to be cafe racered Trophy and about 30% of a Sprint. And some bits :)
     
  14. stevethegoolie

    stevethegoolie Elite Member

    Oct 16, 2014
    2,452
    800
    East Riding of Yorkshire
    Hi, Thorcusmodee.
    I realise that this is a forlorn hope, but ...... deep breath ..... have you got such a thing as a yellow rectangular reflector (9cm x 2.5cm) which fits on the side of the radiator cowl - the plastic cover on each side? One of mine went AWOL after I removed it to get at the radiator cap for a coolant change. Obviously I didn't weld it on properly when I re-attached it and it did a runner!: unamused: Bugger!!:mad:
    Thanks.:)
     
    • Funny Funny x 1
  15. matt botterman

    matt botterman Active Member

    Feb 4, 2016
    106
    33
    sussex
    What state are the Trophy front brakes in? Are they they black 4pots?

    I would be interested in Calipers, Master cylinder, lines and disks. Rough price?
     
  16. Thorcusmodee

    Thorcusmodee Well-Known Member

    Jun 2, 2018
    175
    93
    Boston, Lincs
    Sorry, I used all of that on my Cafe racer project.
     
  17. Thorcusmodee

    Thorcusmodee Well-Known Member

    Jun 2, 2018
    175
    93
    Boston, Lincs
    Yeah, I've got one of them. It will need a double sided sticky pad to fix it to the cowl. It's just the plastic insert though so I don't know how you could weld it :)
     
  18. stevethegoolie

    stevethegoolie Elite Member

    Oct 16, 2014
    2,452
    800
    East Riding of Yorkshire
Loading...

Share This Page