Anyone with "old skool" round headlights running LED Daymakers at all ? Have seen them advertised but wanted to know if they are worth the swop. Seem to be plug and play but wanted to check Opinions / reviews appreciated Thanks All
I have seen those and I don't think there is anything wrong with them. You just need to ensure you grab it from a reputable source. I guess it boils down to individual taste Someone in this forum might have it and come along to give you more info
Here in Perth WA , JCS sell two different sizes, 6" and 7" LED head lights , they are simple PNP , just swap them out and away you go, they are expensive though possibly on par with genuine Triumph head lamps. They look good and everyone I have spoken to about them state they are a really good improvement on standard lights !
There are several threads on the forum. Use the search function and just use H1 or H4, LED, etc. as your search terms. There was one recently (can't find it) about putting them into a T-Bird and it worked well. Based on that write-up, I bought the bulbs, but won't be putting them in until I have time to tighten up my steering bearings.
Thnks for reply . im looking at swopping the whole headlight unit fr LED rather than just the bulbs in the standard light
changed my "old skool" lights for Led type. back in oct 16, Far better. plug n play. £90 from flea bay.
I got a set from ebay, they need the cooling fins on the back trimmed down as they don't fit very well only fitted them yesterday and haven't rode the bike yet to see what they're like
Well .. went ahead and did it ...£70 the pair on good old fleabay and all I can say is WOW ... pure white light that really does light up the road .. and never had so many cars move over for me when filtering .. even in bright sunlight Took a whole 5 minutes a side to fit .. genuine plug and play H4 fitments A quick before and after pic as well
HI, I got mine off flea bay, extool-2016 was the dealer I got mine from. £87.40. Had no problems with them.
If your headlight is standard 6 or 7 inches yes there are led lights that are plug and play , just measure and shop on eBay .
Was there any issue fitting them? Rim size, trimming down cooling fins etc. Or was it really out with the old and in with the new? Looking at 5.75" for my 2010 Speed Triple
Video is an install on a Harley but the principal is the same Have ordered a pair off Amazon Wisamic 5.75" £45 with same day delivery! Will do some install photos Highly rated on Amazon Specifies Triumph fitment 9x Osram LED per unit Has holes that can opened in the rear heatsink to get rid of misting which is a known issue with these type of lights Doesn't have a function for the daylight running light so that cable would need wrapping and tucking away