Took it outside, like Bambi on ice. Sure should have spikes on the tires But manage to get enough meters to see the abs lamp go of, that means that the 19" front adapted to the system. Worries over
Update on the front fender. The plan was to secure the fender to the brace from BC. Took some work due to the curve of the brace and fender. Solution was to make the holes sideways and not strait from the top. I cut and split the oem bracket, all trned out okey imo. I will put a mudflap on it, since the fender is a little short.
1. How much louder is the pipe vs stock? 2. Does the pipe still allow a pillion? 3. I thought a high pipe required removal of the right plastic cover? Looks like yours is still in place.
Hi I will post a sound sample. Its loader but in a different way since it is a 2-1 exhaust. Not easy to ride two up on this setup, I will need to make a offset like on the old 865 Scrambler. Not a priority but something I have as a mission when all other issues is sorted out. The plastic cover will probably be damage, maybe the paint will have it. I will ride it and maybe make a protection if I see a meltdown. It will always be some problems, not many have gone this way on the water Bonneville yet. When I started with Triumph retro in 2007 all stuff like this was already fixed by some other out there
Sounds great! Loud and deep but not obnoxious. This is pipe that is listed/marketed for the Street Twin, part # A9600620, correct?
I like what your doing, keep it up one question i have is, how did you get past the shocks length as they are longer than standard. Did you get the made shorter or did you just go with the length, looking at the gap between the wheel and mudguard i guess yes? I have pressed in some 15mm i.d bearings in mine and took about 0.5mm off the mount and the fit ok but not sure of the chain. did you adjust yours. Im just making sure im going in the right direction. cheers
I am about to do some work together with a friend on Bmw motorrad. So I will probably need to jump away from this project. If any here need any parts let me know, It will not be possible to sell the bike (as is) in my country due to low interest for a not stock bike. I can put up a list of the parts, just pm me.
Hey henry awesome build !!! I need to ask some questions 1. Did you needed any programming on the bike ? Does the warranty cover you ? I have a t100 and i just ordered the exhaust and i collect any info i can find
I am not sure about the Triumph warranty practice. The exhaust is a oem part and should be okay, but then again the x pipes is removed. That could be an issue. No programming needed for that.
Thanks i asked and they said that if a problem will happen cuz of the exhaust then they dont cover you ... you havent anything right ?
