Hi Folks - I received Dealer Tool this week and hooked it up to my 2014 T-Bird Commander. It's very easy to work with. I thought the throttle bodies were out of balance, but they aren't. I'm planning to bleed the ABS system, but probably won't get to that until next week. I checked for fault codes, found one, noted it, and then cleared it. It didn't return I checked the Sensor Report pages and was very impressed with the information provided. However, I don't have 'reference values' for what the sensor readings should be. I have the official Triumph Service Manual, but I don't see reference values in the manual. The error codes are there with step-by-step procedures for trouble-shooting. The units of measure for the various sensors are also there, but not the expected values. Does anyone know if there are tables of the expected sensor values available? If not, are this information just considered 'nice to have' and you just have to wait for a fault code to know when something is going bad? Also, while looking at error codes, I came across the following online service manuals for those of you that can use them. They appear to be the 'read deal.' 2009 Triumph T-Bird 1600 Service Manual https://trumpettouring.files.wordpress.com/2014/09/thunderbird-service-manual.pdf 2006 Tiger Service Manual https://www.scribd.com/doc/25707234/Workshop-Manual-Triumph-Tiger-1050-2006 2007 Rocket III Service Manual http://www.piano-person.com/r3docs/Service_Manual_R3S_C_T.pdf 2010 - 2013 Tiger 800XC Service Manual https://biker.ee/manuals/triumph/Triumph_Tiger_800_XC_2010-2013_(ABS_Model_included).pdf 2009 Street Triple Service Manual https://docslide.com.br/documents/workshop-manual-street-triplepdf.html
