46mm socket

Discussion in 'Speed Triple' started by Dougie D, Dec 28, 2016.

Page 1 of 2
  1. Dougie D

    Dougie D Crème de la Crème

    Jan 30, 2016
    10,711
    1,000
    Blairgowrie Perthshire
    #1 Dougie D, Dec 28, 2016
    i'm needing to buy a 46mm socket to remove the rear wheel i was thinking about this one
    http://www.halfords.com/webapp/wcs/...earch&storeId=10001&catalogId=10151&langId=-1
    or am i better getting a cheaper one as it will only be used a couple of times a year?
    i was going to use a torque wrench for removing the nut but I've read somewhere that it's better to use a breaker bar as using a torque wrench to remove it could possibly damage the wrench??
     
    • Like Like x 1
  2. GaryM

    GaryM It's him, you know who. Him from you know ....

    Apr 28, 2016
    862
    500
    Patna , Ayrshire
    #2 GaryM, Dec 28, 2016
    • Like Like x 1
  3. t552

    t552 Senior Member

    Nov 17, 2014
    418
    113
    Bristol UK
    #3 t552, Dec 28, 2016
    You can get a 1 13/16". It's for a mini stub axle. Comes with 1/2" drive instead of 3/4" and usually cheaper. Plus better fit.
    Yes don't use torque wrench to remove use a breaker bar and always store your wrench in the lowest setting.
     
    • Like Like x 3
  4. Dougie D

    Dougie D Crème de la Crème

    Jan 30, 2016
    10,711
    1,000
    Blairgowrie Perthshire
    #4 Dougie D, Dec 28, 2016
    • Like Like x 1
  5. MickEng

    MickEng Noble Member

    Sep 29, 2016
    1,808
    450
    West Yorkshire
    #5 MickEng, Dec 28, 2016
    Hi Dougie,
    t552 is dead right, you should never use a torque wrench for undoing nuts/bolts, only for tightening.
    You can damage the calibrated mechanism for no good reason, a breaker bar should always be used.
    Halfords professional range with lifetime guarantee is good gear, treat yourself!
     
  6. t552

    t552 Senior Member

    Nov 17, 2014
    418
    113
    Bristol UK
    #6 t552, Dec 28, 2016
    My job is calibrating torque wrenches for aircraft industry, so see a few lol, they have 1000's
     
  7. roadrider

    roadrider First Class Member

    Jul 26, 2013
    1,003
    500
    Oxon
    #7 roadrider, Dec 28, 2016
    I've got one I'm not using anymore.
    Make me an offer.
     
  8. roadrider

    roadrider First Class Member

    Jul 26, 2013
    1,003
    500
    Oxon
    #8 roadrider, Dec 28, 2016
    I don't drink tea and as for the rest,I've still got a fair supply to get through;) thanks.
     
  9. Abcght100

    Abcght100 Active Member

    Nov 21, 2015
    51
    28
    Norfolk
    #9 Abcght100, Dec 28, 2016
    Just worth mentioning once you have finished using the torque wrench slacken the preset tension right off or it will damage it.
     
  10. MickEng

    MickEng Noble Member

    Sep 29, 2016
    1,808
    450
    West Yorkshire
    #10 MickEng, Dec 28, 2016
    Just out of interest t552, how often are they calibrated ?
     
  11. t552

    t552 Senior Member

    Nov 17, 2014
    418
    113
    Bristol UK
    #11 t552, Dec 28, 2016
    It varies between 1 month, 3 months, 6months and yearly.
     
  12. Dougie D

    Dougie D Crème de la Crème

    Jan 30, 2016
    10,711
    1,000
    Blairgowrie Perthshire
    #12 Dougie D, Dec 29, 2016
    yes i've got a halfords tool kit with ratchets and sockets but not one as big as 46mm,i didn't realize there was such a variety of sockets on the market:confused: just out of curiosity i notice impact sockets are much stronger than "normal" sockets and they don't seem to be any more expensive why therefore are sockets not all impact sockets? i take it you don't need an impact wrench to use them
     
  13. Dougie D

    Dougie D Crème de la Crème

    Jan 30, 2016
    10,711
    1,000
    Blairgowrie Perthshire
    #13 Dougie D, Dec 29, 2016
    I've had my torque wrench for several years but i only use it a few times a year,would it still need to be re calibrated?..if so is there an easy way of testing it..i always slacken the tension off once I've used it
     
  14. t552

    t552 Senior Member

    Nov 17, 2014
    418
    113
    Bristol UK
    #14 t552, Dec 29, 2016
    If you pm you can send it to me and I can check it for you.
     
    • Like Like x 2
  15. MickEng

    MickEng Noble Member

    Sep 29, 2016
    1,808
    450
    West Yorkshire
    #15 MickEng, Dec 29, 2016
    Impact sockets are intended to be used with impact drivers or air tools.
    This is due to the material type which is 'softer' than normal chrome vanadium sockets to absorb the shock loading. Regular sockets can crack under impact as they are more brittle.
    Either type would work for DIY mechanics, but you will find chrome sockets being a thinner wall section are easier to use in tighter areas, are harder wearing and they look nicer! lol
     
    • Like Like x 2
  16. Dougie D

    Dougie D Crème de la Crème

    Jan 30, 2016
    10,711
    1,000
    Blairgowrie Perthshire
    #16 Dougie D, Dec 29, 2016
    Thanks for the offer t552, i've got a mate you owns a garage so i'll get him to check it over for me,pretty sure it will be fine though as it's had any easy life!
     
  17. Dougie D

    Dougie D Crème de la Crème

    Jan 30, 2016
    10,711
    1,000
    Blairgowrie Perthshire
    #17 Dougie D, Dec 29, 2016
    If it's supposed to be a 46mm why would a 1 13/16 be a better fit,is it because it is slightly bigger?
     
  18. t552

    t552 Senior Member

    Nov 17, 2014
    418
    113
    Bristol UK
    #18 t552, Dec 29, 2016
    It's 46.04mm
    But most 46 I've seen are bi-hex. 1 13/16" tend to be full hex unless they are impact. Maybe just lucky but what I've seen. But they tend to be cheaper to and 1/2" drive which I have the bars to fit
     
    • Like Like x 3
  19. MickEng

    MickEng Noble Member

    Sep 29, 2016
    1,808
    450
    West Yorkshire
    #19 MickEng, Dec 29, 2016
    Totally agree DD
    I am sure Dougie has enough info now to make his decision.
     
    • Like Like x 2
  20. Dougie D

    Dougie D Crème de la Crème

    Jan 30, 2016
    10,711
    1,000
    Blairgowrie Perthshire
    #20 Dougie D, Dec 29, 2016
    yes and i won't say how much i spent in case i get another bollocking from Mr O for wasting money :oops:
     
    • Like Like x 1
Page 1 of 2
Loading...
Similar Threads - 46mm socket
  1. Montyzoomer

    Gt1050 - 2 Wire Accessory Socket

    Montyzoomer, Jun 18, 2024, in forum: Technical Help
    Replies:
    0
    Views:
    353
    Montyzoomer
    Jun 18, 2024
  2. beerkat

    Usb Socket Advice Sought

    beerkat, Feb 22, 2024, in forum: Triumph Twin Power
    Replies:
    14
    Views:
    3,556
    Baza
    Feb 29, 2024
  3. SevenSixFiveRS

    Removal Fittign Of Usb Socket (street Triple 765)

    SevenSixFiveRS, Jan 6, 2023, in forum: Technical Help
    Replies:
    3
    Views:
    2,502
    Iceman
    Jan 10, 2023
  4. Malcolm Woods

    Socket

    Malcolm Woods, Oct 4, 2022, in forum: Triumph General Discussion
    Replies:
    6
    Views:
    1,923
    Damien
    Oct 10, 2022
  5. underdoug

    Gps And And Accessory Socket 2010-2015 T100

    underdoug, Nov 6, 2021, in forum: Technical Help
    Replies:
    0
    Views:
    1,496
    underdoug
    Nov 6, 2021

Share This Page

Sign up