Separate names with a comma.
Hi, The carbs were done for me by Allens Performance Ltd, local carb specialists based in Bingham near Nottingham. They are a excellent firm to...
Hi, Just like to post that the bike is now fixed and running ok, did a 60 mile ride yesterday to check it out and all fine. As I had tried...
Hi Keith, I am near Mansfield in Notts. The first thing I suspected was the coil, but I have tried several spare coils, including swapping No 1...
I am running the bike on the bench using an auxiliary tank connected straight to both fuel lines, so don't think it's a flow or vacuum problem,...
Have swapped complete coil and lead assembly over with No 3 cylinder, no different?
Thanks for the replies,having trouble getting 12mm adapter for my compression gauge locally so have had to order one of EBay. Going to make up a...
Hi, I have a problem with my Mk 1 Speed triple only running on 2 cylinders, mileage 11K. The problem is on No 1 ( left side ). I have had the...
Hi ram, Thought they might be surface hardened, think it might be a bit risky so wont bother. Always have to fit thinner shims, so end...
Hi, Over the years I have accumulated quite a few shims, most of which are thick ones. Question is as any one ever had shims surface ground...
Thanks Dave
Hi, Just rebuilding the front end on a 955i sprint year 2000, cant find torque setting for bottom yoke clamp bolts in manual, can anyone please...
Thanks Steve, Will have to find out were the diode is located, have tried another rev counter but it was same. Have not got...
Hi, Have just tried your suggestions, if I turn the engine off with the key at any revs the needle stops at 500 rpm, only returns to stop when...
Hi Steve, Its a great bike, still enjoy riding it after 12 yrs. Its one of the last Mk1 Speed Triples, in black, 6 speed version,...
Hi ram, Thanks for the reply, don't know how I have done it but I seem to have started two threads. I will as you suggest check the...
Hi Steve, Thanks for the reply. I have owned the bike since 2002, its a 1997 reg and I got it with only 1k on the clocks. I dont do...
Hi all, Looking for help with a problem with my Mk 1 speed triple, the bike is very slow to return to tick over and sometimes sticks at...