Separate names with a comma.
I’d say the circlip should go on the bolt inside the adjuster so it can pull the axle rearwards to tighten the chain. The circlip groove should be...
A run out on the mud plugger on some familiar routes. Just as in Mrs V’s ride, plenty of mud from runoff and “organic fertiliser” on the...
I would expect the FSM to have info regarding lube or thread lock in addition to torque settings. The only lube I’ve ever used on spark plugs is a...
In 2013 I got stranded in Scotland with a stone through the rad on my ZZR. After calling the RAC they tried to get hold of a new one, with the...
Not my bag at all I’m afraid but you can’t ignore the quality of the artwork. Superb.
We get this a lot round here, balaclava clad lowlifes on these new breed of electric off road bikes as well as the usual stolen motocross machines...
That’s a pretty accurate way of getting the correct torque out “in the field”, plus, it helps on things like rear axle nuts where you have to line...
I had a clear out recently and threw a few helmets in the bin, some ancient, like a Paddy Hopkirk Agordo F, a really old open face and some what...
Had a nice run out over Strines, first time for a while in dry, warm(ish) weather in blue skies and unbroken Sunshine, almost forgot what it...
Never heard of an issue requiring a bigger rad. If its not actually overheating then there isn't a problem. The fan may be cutting in frequently...
Possibly, given aluminium has a coefficient of expansion around twice that of steel, plus the alloy wheels are much thicker than the steel wheels....
The wheels are 6 stud and the 76lb/ft spec is for alloy wheels. If steel wheels are fitted the spec is 105lb/ft. Both types of wheel use different...
I find lower torque settings easier to judge by hand than higher settings. When refitting wheels to the SUV I never used a torque wrench, instead...
I went to the Dr’s yesterday and he gave me some anti gloating cream. I can’t wait to rub it in.
I remember filling the car up at a local station a couple of years back, nozzle in the filler, holding the trigger and just casually looking...
