T100 Sidestand

Discussion in 'Technical Help' started by Rob2025, Sep 29, 2025 at 4:21 PM.

  1. Rob2025

    Rob2025 New Member
    Subscriber

    Aug 6, 2025
    23
    3
    Midlands
    Hi all,

    I noticed a slight bit of play in my side stand of my T100. Just wondered if this is normal? Also, upon inspection I noticed the head of the pin running through the stand pivot seems to be sitting proud with a gap of about 3-4 mm between the stand and the pin head. (photo - yellow arrow). Is this normal?

    Thanks,
    Rob

    Sidestand.jpg
     
    • Like Like x 1
  2. TRIPLE X

    TRIPLE X Senior Member

    Sep 1, 2021
    637
    243
    Norfolk
    Is the circlip in place on the other end of the pivot pin? I can't see it in the pic.
     
    • Agree Agree x 1
  3. Rob2025

    Rob2025 New Member
    Subscriber

    Aug 6, 2025
    23
    3
    Midlands
    Hi there, I think so - I took this photo last night. Thanks for you help.

    Back of pin on stide stand.jpg
     
    • Like Like x 1
  4. TRIPLE X

    TRIPLE X Senior Member

    Sep 1, 2021
    637
    243
    Norfolk
    Yes, all present and correct. I've always found side stands to be a bit of a loose sloppy fit. Nothing to worry about.
     
    • Like Like x 1
    • Agree Agree x 1
  5. sprintdave

    sprintdave Nurse, think it's time for his medications.
    Subscriber

    May 25, 2014
    1,662
    750
    Birmingham
    If they are too tight it is a bugger to flip it back while seated on the bike
     
    • Like Like x 1
    • Agree Agree x 1
  6. Rob2025

    Rob2025 New Member
    Subscriber

    Aug 6, 2025
    23
    3
    Midlands
    Thanks all :)
     
    • Like Like x 1
Loading...

Share This Page