T100 Sidestand

Discussion in 'Technical Help' started by Rob2025, Sep 29, 2025 at 4:21 PM.

  1. Rob2025

    Rob2025 New Member
    Subscriber

    Aug 6, 2025
    19
    3
    Midlands
    Hi all,

    I noticed a slight bit of play in my side stand of my T100. Just wondered if this is normal? Also, upon inspection I noticed the head of the pin running through the stand pivot seems to be sitting proud with a gap of about 3-4 mm between the stand and the pin head. (photo - yellow arrow). Is this normal?

    Thanks,
    Rob

    Sidestand.jpg
     
  2. TRIPLE X

    TRIPLE X Senior Member

    Sep 1, 2021
    635
    243
    Norfolk
    Is the circlip in place on the other end of the pivot pin? I can't see it in the pic.
     
  3. Rob2025

    Rob2025 New Member
    Subscriber

    Aug 6, 2025
    19
    3
    Midlands
    Hi there, I think so - I took this photo last night. Thanks for you help.

    Back of pin on stide stand.jpg
     
  4. TRIPLE X

    TRIPLE X Senior Member

    Sep 1, 2021
    635
    243
    Norfolk
    Yes, all present and correct. I've always found side stands to be a bit of a loose sloppy fit. Nothing to worry about.
     
  5. sprintdave

    sprintdave Nurse, think it's time for his medications.
    Subscriber

    May 25, 2014
    1,661
    750
    Birmingham
    If they are too tight it is a bugger to flip it back while seated on the bike
     
Loading...

Share This Page