2013 Tiger 800 Denali Horn Fitting , Help Needed

Discussion in 'Technical Help' started by Dave Murphy, Sep 16, 2025.

  1. Dave Murphy

    Dave Murphy New Member

    Jul 3, 2021
    0
    1
    Wickford - Essex - UK
    Hi to all in this Forum

    I need some help regarding the fitting of an after market horn ( Denali ) on my 2013 Tiger 800 .
    My bike came fitted with crash bars , but the horn will not fit behind the crash bars, albeit the bike was dropped before I bought it and there seems what I would say minor damage to the left hand side bars .
    So my question is to anyone with crash bars has anyone fitted this type of horn behind the L/H / side bars without any problems , I believe the bars are now set too far back to allow me to mount behind , if I find they should fit easily then I will need to source a replacement set .. sorry for long letter , any help greatly appreciated .. regards Dave .
     
    • Useful Useful x 1
  2. No1UKnow

    No1UKnow New Member

    Sep 18, 2025
    0
    1
    Louisiana
    I also have a 2013 Tiger. I purchased the Denali version where the horn and air pump are separate and placed the air pump and relay under the seat. I zip-tied the horn itself under the beak and ran a hose between the two. I use the stock horn circuit to actuate the relay and even kept the stock "meep-meep" as part of the system.
     
    • Agree Agree x 1
  3. davidsolano

    davidsolano New Member

    Oct 11, 2025
    1
    0
    United States
    Hey Dave, I had the same issue on my 2014 Tiger 800. I solved it by using a small L-bracket to move the Denali horn slightly forward. If your crash bars got pushed back from the drop, that’s likely the problem. Try loosening them to see if you can shift them forward before buying new ones.
     
    • Like Like x 1
Loading...

Share This Page