Broken Seal

@Wayne 69 Welcome to the family. I take it you are after a new electrical Gromet to replace. Hopefully one of the wise one will be along soon and for the price of a big thanks they may provide you with a part number. Or try somewhere like Fowlers.

 

Triumph 675 triples also leak from the wire grommet. I'd be surprised if a new grommet would be any better.

Remove the case and apply a gasket sealant both in the wire holes and around the outside. Don't blather it on but ensure to coat the faces.
Reassemble.
Also ensure the engine breather is free to flow and not kinked or trapped anywhere, blow down it to confirm. This grommet maybe acting as a breather otherwise.

 

Just clean up the grommet and mating surfaces use some decent RTV sealer, not the cheap bathroom stuff.

 

Creative or true @Markus ?

I've seen numerous things act as breathers when the intended item was blocked.

 

@Eldon:
I am not sure. But it sounds interesting.

 

@Wayne 69 Did you get the seal fixed.

 

@Wayne 69 Not to worry you will get there as and when. Good luck.