Featured Handlebar Risers.

OK, machine a pair up, bit concerned about the powder coating as humidity is not good, but I'll see how i go. Im in the new forest, so not far from you.

 

Thanks cupoftea, if the powder coating is too much hassle don't worry about doing that.

 

PM sent

 

Here's a pair of risers in black.

 

Hi Cupoftea
Are the raisers still available.
I needed one for my bonneville SE 2014 model.
How do I contact you

 

Hi,
Not sure if they are the same fit.
I need some dimensions to be sure.

 

What dimensions exactly do you need. I mean which part should I measure

 

These seems to be similar

 

If you look at some of the pictures I've put up, they may differ to the dimensions of your bar mounts. There are a lot of ledges on the water cooled mounts. I will get one measured for you.

 

Thank you Cupoftea. Is it possible to exchange emails here

 

The smallest dimension is 21mm approx. Hole is 10mm clearance.
Does your holders have a fixed bolt?

 

The smallest dimension is 21mm approx. Hole is 10mm clearance.
Does your holders have a fixed bolt?

 

The bolt are fixed I guess. I will need new bolts

 

Plus clamps.

 

Yes. can you send me the photos of the whole set

 

Pleases share your email. I will send you the details
[email protected]