Stator Enough For Heated Vest And Led Lights?

Searched, but couldn't find an answer.

I have a 2012 Speed Triple R and want to know if the stator has enough reserve power to run a heated vest and LED driving lights.

The vest draws between 40 and 50 watts, the LED lights about the same; to be conservative 100 watts, or around 8.3 amps at 12 volts.

Thanks!

 

Maybe it's safe to assume that since this is the same engine used in the ST bikes the stator will be the same? And with a sport-touring bike it is assumed that there's enough reserve to run lots of accessories?

 

The specs say 35 amps, but the specs don't say what the bike uses to run (ignition, charging, electronics, lights, etc.). The difference is what's important for adding accessories like lights and heated gear. If for example the bike requires 30 amps to keep it running, and the accessories use 8.3, that would mean that with a 35 amp stator, the battery would be discharging at 3.3 amps, and could be dead by the end of the day.

 

Thank you.

 

So far so good. I've run the lights and heated gear at the same time and there's no evidence that it doesn't have enough juice to run both. I also have heated gloves, but haven't run them yet.