Frame caps

Discussion in 'Technical Help' started by brybrem, May 27, 2013.

Page 1 of 3
  1. brybrem

    brybrem Senior Member

    Mar 8, 2013
    1,435
    113
    North Wales
    #1 brybrem, May 27, 2013
    Does anyone know how to take out those plastic caps that cover the the swing-arm spindle holes in the frame of the Speed Triple? I'm guessing they just prise out but I'd rather know before attempting it. These little fellahs:

    IMG_1072.jpg

    IMG_1072.jpg
     
  2. P19DJG

    P19DJG Banned

    Mar 16, 2013
    1,660
    0
    #2 P19DJG, May 27, 2013
    I reckon the little dots around the outside play a part in their removal. Possibly locate something in two opposite dimples & rotate?
     
  3. brybrem

    brybrem Senior Member

    Mar 8, 2013
    1,435
    113
    North Wales
    #3 brybrem, May 27, 2013
    They actually spin freely. The smaller round bit in the middle is separate and I suspect that it pops out first but they seem to be very fragile and I don't want to break them. I need to take them out to use the Abba stand.
     
  4. P19DJG

    P19DJG Banned

    Mar 16, 2013
    1,660
    0
    #4 P19DJG, May 27, 2013
    Gently prize it off lifting from opposite sides with a small flat blade screwdriver. Possible warm them up first with hot water to make them less brittle?
     
  5. brybrem

    brybrem Senior Member

    Mar 8, 2013
    1,435
    113
    North Wales
    #5 brybrem, May 27, 2013
    I haven't got a big enough basin to sink the bike up to the swing arm spindle. Any other suggestions?
     
  6. P19DJG

    P19DJG Banned

    Mar 16, 2013
    1,660
    0
    #6 P19DJG, May 27, 2013
    Will it not fit in the bath?
     
  7. brybrem

    brybrem Senior Member

    Mar 8, 2013
    1,435
    113
    North Wales
    #7 brybrem, May 27, 2013
    Oh, yeah! Jeez I can be stupid sometimes! scratch head.gif

    scratch head.gif
     
  8. P19DJG

    P19DJG Banned

    Mar 16, 2013
    1,660
    0
    #8 P19DJG, May 27, 2013
    According to the manual you just locate a chisel under the edge of the centre raised part & smack it with a hammer! Hope that helps :cool:
     
  9. brybrem

    brybrem Senior Member

    Mar 8, 2013
    1,435
    113
    North Wales
    #9 brybrem, May 27, 2013
    Brilliant! A sensible suggestion at last. Thanks. :upyeah:
     
  10. SpankyHam

    SpankyHam Member

    Apr 17, 2013
    351
    16
    Wrexham, North Wales
    #10 SpankyHam, May 27, 2013
    Agree with pig a specialist gentle persuasion device is in order

    image.jpg

    image.jpg
     
    • Like Like x 2
  11. brybrem

    brybrem Senior Member

    Mar 8, 2013
    1,435
    113
    North Wales
    #11 brybrem, May 27, 2013
    Oh, the ol' Triumph fine tuning kit!
     
    • Like Like x 1
  12. P19DJG

    P19DJG Banned

    Mar 16, 2013
    1,660
    0
    #12 P19DJG, May 27, 2013
    Did my hammer & chisel theory work Bry? :smile:
     
  13. brybrem

    brybrem Senior Member

    Mar 8, 2013
    1,435
    113
    North Wales
    #13 brybrem, May 27, 2013
    To be fair I didn't try, sorry but I didn't have too much confidence in your theory. I did have a little try with a sharp screwdriver but it wasn't sharp enough so I tried with a Stanley knife blade and as I met a bit of resistance I thought I'd wait until someone posted something even remotely sensible (no offence) or phone Bill Smiths tomorrow. But hey, thanks for absolutely naff all. You've been great! :smile:
     
  14. P19DJG

    P19DJG Banned

    Mar 16, 2013
    1,660
    0
    #14 P19DJG, May 27, 2013
    Always here to help brother :upyeah:

    Some say im like the 4th emergency service :smile:
     
    • Like Like x 1
  15. SpankyHam

    SpankyHam Member

    Apr 17, 2013
    351
    16
    Wrexham, North Wales
    #15 SpankyHam, May 27, 2013
    To be fair you had your bike less than 24 hours and we were already advising breaking out the hammers!

    remember if at first you don't succeed get a bigger hammer
     
  16. brybrem

    brybrem Senior Member

    Mar 8, 2013
    1,435
    113
    North Wales
    #16 brybrem, May 27, 2013

    Who? Who says that? Go on, name me one person (OK, apart from Jim) who says that!

    View attachment 1103
     
  17. SpankyHam

    SpankyHam Member

    Apr 17, 2013
    351
    16
    Wrexham, North Wales
    #17 SpankyHam, May 27, 2013
    Lets face it if you had already tried the other 3 emergency services and they cant help your pretty fecked anyway so might as well just ask pig
     
    • Like Like x 2
  18. brybrem

    brybrem Senior Member

    Mar 8, 2013
    1,435
    113
    North Wales
    #18 brybrem, May 27, 2013
    Fair comment, really, I just hope no-one from the coast guards is on this forum! Just sayin'...:wink:
     
  19. P19DJG

    P19DJG Banned

    Mar 16, 2013
    1,660
    0
    #19 P19DJG, May 27, 2013
    Sarah Marshall (Kristen Bell)
     
  20. SpankyHam

    SpankyHam Member

    Apr 17, 2013
    351
    16
    Wrexham, North Wales
    #20 SpankyHam, May 27, 2013
    Forgot about her
     
Page 1 of 3
Loading...
Similar Threads - Frame caps
  1. mr2rob

    Frame Paint

    mr2rob, Apr 1, 2025, in forum: Thunderbird
    Replies:
    1
    Views:
    741
    Pegscraper
    Apr 1, 2025
  2. Markus McMillin

    1973 Triumph Tiger - High Oil Pressure In In-frame Oil Tank

    Markus McMillin, Oct 5, 2024, in forum: Vintage Classics
    Replies:
    1
    Views:
    807
    speedrattle
    Oct 13, 2024
  3. Markus McMillin

    1973 Triumph Tiger - High Oil Pressure In In-frame Oil Tank

    Markus McMillin, Sep 30, 2024, in forum: Technical Help
    Replies:
    4
    Views:
    946
    Markus McMillin
    Oct 1, 2024
  4. Alex Masters

    2005 Triumph Bonneville T100 Frame W/title

    Alex Masters, Aug 5, 2024, in forum: Parts, Accessories & Clothing
    Replies:
    0
    Views:
    452
    Alex Masters
    Aug 5, 2024
  5. QuadumphUK

    Thruxton Rs 2017 Sub Frame / Breakers

    QuadumphUK, Jan 25, 2024, in forum: Triumph General Discussion
    Replies:
    0
    Views:
    898
    QuadumphUK
    Jan 25, 2024

Share This Page

Sign up