Featured 1967 Tr6c Full Restoration For Su

Discussion in 'Builds & Projects' started by darkman, Nov 10, 2021.

Page 1 of 10
  1. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,658
    1,000
    Southcoast of the UK Earth
    #1 darkman, Nov 10, 2021
    Looks like this is going to be a long job.

    s-l1600 (5).jpg

    s-l1600 (7).jpg
     
    • Like Like x 12
    • WTF WTF x 4
  2. Adie P

    Adie P Crème de la Crème

    Jul 7, 2018
    3,707
    1,000
    MID DEVON
    #2 Adie P, Nov 10, 2021
    Oh, come on, @darkman ..... you'll have that finished by Christmas. :p Well, the motor, at least. Good practice for when I'm ready to hand mine over............ :kissing:
     
    • Funny Funny x 7
    • Agree Agree x 1
  3. TEZ 217

    TEZ 217 Crème de la Crème

    Mar 6, 2016
    3,154
    1,000
    south shields
    #3 TEZ 217, Nov 10, 2021
    Good to have you back on the job Sir.
    Crack on you've done worse :cool: or just as bad:D
    Just makes the before and after pics all the more eye watering.
    Can't wait :cool:
     
    • Agree Agree x 6
    • Like Like x 1
  4. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,658
    1,000
    Southcoast of the UK Earth
    #4 darkman, Nov 11, 2021
    Had a rumage through all my parts and found a few grands worth of parts i had just lying around that i will use on the restoration :)

    20211111_112529.jpg

    20211111_112535.jpg

    20211111_112550.jpg

    20211111_112557.jpg
     
    • Like Like x 16
    • Useful Useful x 2
  5. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,658
    1,000
    Southcoast of the UK Earth
    #5 darkman, Nov 12, 2021
    More rummaging in the shed turns up more original parts :)

    20211111_125925.jpg

    20211111_125929.jpg

    20211111_125933.jpg

    20211111_125942.jpg
     
    • Like Like x 12
  6. Vulpes

    Vulpes Confused Member

    Mar 14, 2018
    19,587
    1,000
    Netherlands
    #6 Vulpes, Nov 12, 2021
    Bit of a job ahead of you it would seem... :eek:
    I'm looking forward to following this! :)
     
    • Agree Agree x 9
    • Like Like x 1
  7. timboo

    timboo Senior Member

    Oct 17, 2021
    312
    113
    Cambridgeshire
    #7 timboo, Nov 13, 2021
    Wow don’t know what to make of this thread. First thoughts either a lucky punt with your stash of spare parts or someone who is more akin to a warehouse.
    Anyway looking forward to seeing your progress
     
    • Like Like x 2
    • Agree Agree x 1
  8. Helmut Visor

    Helmut Visor Only dead fish go with the flow
    Subscriber

    Oct 3, 2018
    6,570
    1,000
    Three Counties
    #8 Helmut Visor, Nov 13, 2021
    Have a search on the forum for previous projects @darkman has done and it will give you a bit more of an understanding ;)
     
    • Agree Agree x 4
    • Like Like x 2
  9. timboo

    timboo Senior Member

    Oct 17, 2021
    312
    113
    Cambridgeshire
    #9 timboo, Nov 13, 2021
    Excellent cheers I will have a look when u see those first images its fascinating to see how a project begins. I look in envy as I wouldn’t have the time and more importantly the skill
     
    • Like Like x 2
    • Agree Agree x 1
  10. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,658
    1,000
    Southcoast of the UK Earth
    #10 darkman, Nov 13, 2021
    I found a 67 TR6C that had been converted into a chopper years ago in the US and then forgotten about and stripped down when the engine expired, so i'm going to restore it to original as when it left the factory, luckily i have found most of the original parts i will req other than a few that i'm on the hunt for.
     
    • Like Like x 8
    • Agree Agree x 1
  11. curly

    curly Noble Member

    Jul 3, 2016
    758
    443
    Burton Upon Trent
    #11 curly, Nov 14, 2021
    The end result will be the same as always, better than when it left the factory.
    This thread is like an early Christmas present, thanks once again Darkman for sharing and showing your extraordinary skills at work, quite remarkable!
     
    • Like Like x 3
    • Agree Agree x 3
  12. speedrattle

    speedrattle Senior Member

    Feb 19, 2021
    1,182
    243
    appalachia usa
    #12 speedrattle, Nov 15, 2021
    Last edited: Nov 15, 2021
    what are you missing?
     
    • Like Like x 1
    • Agree Agree x 1
  13. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,658
    1,000
    Southcoast of the UK Earth
    #13 darkman, Nov 15, 2021
    A bottom yoke, front frame fuel tank fitting (cut off as it was a chopper in a past life), carb, side stand, front mudguard frames, oil tank, 66 on flanged front hub and a small fittings and nuts n bolts.
     
    • Agree Agree x 1
  14. speedrattle

    speedrattle Senior Member

    Feb 19, 2021
    1,182
    243
    appalachia usa
    #14 speedrattle, Nov 15, 2021
    • Useful Useful x 1
    • Agree Agree x 1
  15. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,658
    1,000
    Southcoast of the UK Earth
    #15 darkman, Nov 15, 2021
    • Like Like x 3
    • Agree Agree x 1
  16. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,658
    1,000
    Southcoast of the UK Earth
    #16 darkman, Nov 18, 2021
    Picked up my project today, looking at it on the bench i thought i might build a chopper but Su soon put a stop to that lol.

    20211118_151723.jpg
     
    • Funny Funny x 5
    • Like Like x 3
  17. Adie P

    Adie P Crème de la Crème

    Jul 7, 2018
    3,707
    1,000
    MID DEVON
    #17 Adie P, Nov 18, 2021
    Thank the Lord for Su's good taste ...... in Trumpets and partners! :D
     
    • Like Like x 2
    • Agree Agree x 2
    • Useful Useful x 1
  18. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,658
    1,000
    Southcoast of the UK Earth
    #18 darkman, Nov 20, 2021
    Spent a few hours cleaning the filler off the frame and cutting off the rear frame and bodged side stand lug, next job is to fit a new front tank mount and new side stand lug.

    20211120_132510.jpg
     
    • Like Like x 9
  19. Wessa

    Wessa Cruising

    Apr 27, 2016
    11,839
    1,000
    North West England
    #19 Wessa, Nov 20, 2021
    I’m watching in awe @darkman . Keep on posting progress please :):)
     
    • Agree Agree x 8
    • Like Like x 1
  20. speedrattle

    speedrattle Senior Member

    Feb 19, 2021
    1,182
    243
    appalachia usa
    #20 speedrattle, Nov 21, 2021
    what are you going to do about the sidestand lug? i have a 66 TR6 frame with the lug broken off.
     
    • Agree Agree x 1
Page 1 of 10
Loading...
Similar Threads - 1967 Tr6c Full
  1. Dummy

    1967 TR6C BOGGING PROBLEM

    Dummy, Aug 8, 2016, in forum: Technical Help
    Replies:
    12
    Views:
    1,814
    sprintdave
    Jan 7, 2022
  2. TonMan

    1967 Mountain Cub – Timing Pinion Dots On Pinion Gear

    TonMan, Sep 14, 2025, in forum: Technical Help
    Replies:
    0
    Views:
    254
    TonMan
    Sep 14, 2025
  3. Geoff U.

    1967 Tiger Cub Clutch Issues

    Geoff U., Nov 11, 2024, in forum: Technical Help
    Replies:
    1
    Views:
    914
    joe mc donald
    Nov 12, 2024
  4. snattsas

    1967 T120 Restoration Gone South

    snattsas, Aug 10, 2023, in forum: Bonneville
    Replies:
    3
    Views:
    1,636
    malokam
    Sep 29, 2023
  5. emlupi

    1967 Triumph Bonneville Tt Special

    emlupi, Aug 13, 2022, in forum: Vintage Classics
    Replies:
    2
    Views:
    1,516
    emlupi
    Aug 15, 2022

Share This Page

Sign up