Featured What you been doing with your TRIUMPH today??

That looks class, well done dude

 

Thats a really interesting showroom. Not far of being a museum or exhibition hall of a very diverse range of bikes.

If you couldn’t find something to like there then you should just take the bus!

Thanks for posting.

 

A very tidy job.

I shall keep my eyes peel to try and see it on the road.

I’ll wave like a mad thing to let you know it’s me.

 

Impressive! Awesome job!

 

Balanced the throttle bodies and installed new plugs and air filter, the throttle bodies were miles out surprised as they were done 3k miles back by a triumph dealer, new Air filter is now the oldest part of the bike, 2012 T100, new air filter manufacturer date19/11/2006??
Was talking to a tech whilst picking up the parts, chatting about bonnevilles I said I was leaving off doing the valve clearances until 15k, interestingly he said that most people who bring in their bonnevilles for the 12k "big service" valves rarily if ever require shims and are 99/100 well within tolerance, but they see a lot of fuel filters full of water and contamination and it's definitely worth doing on schedule. I've seen a few guys on various triumph forums with big mileage who've never done the fuel filter.

 

It’s easy to overdo bolder greens like that. You really pulled that off well.

One of those old school, cozy bike shops you can just hang out in for an afternoon and shoot the shit. Almost a pub-like atmosphere.

 

Getting hard to find shops like that, they're all like bloody boutiques these days, I miss the whiff of castrol R, fags and bullshit.

 

Not the easiest of things to do. Nice job, looks the dog's do das.

 

Today I started to properly fix my Speedmaster seat problem. I stuffed a layer of foam into my old one, under the parts where my weight is. This looks like some mutant duck head...



The cover fitted back on pretty well without fixing, so I went for a two hour ride to try it out. I found the bike now accelerates, brakes and corners way better... or perhaps that's just because I don't have Mrs Mouse on the back which I did for the previous 2000 miles Seriously though, no particular numb bum or squashed testicles so it's looking promising.

May do some more experiments to optimise comfort. I have that useless gel cushion I could cut up and put under the foam where Triumph has some plastic honeycomb matting I believe is intended to have a similar vibration dampening effect. Also time to invest in an upholstery staple gun and an air compressor so I can fix cover properly again.

 

Issues with compressor and initial clear coats but sorted now, phew. At least I didn't have to take everything off. Went with 2 pack rattle can. Once cured polishing to do.
Methinks a new compressor is required, maybe get something that can handle sandblasting cabinet too. Watch out rusty stuff...Over.

 

Back out and about. Hit the local bike pub for some refreshment… and finally took a hit.

Rolled over a curb on my way out and heard a blood-curdling metallic “zinggggg.” Checked out the keel and I was annoyed for like 2 seconds then realized the sump guard simply did its job.





Money well spent.

 

Very nice

 

Seeing that tank and saddle, I was thinking that the forum has many extremely skilled people ranging from upholstery, painting, metal bashing, welding, mechanics, metalwork, leather-working, electrics/electronics, etc. All the talent to homemake an entire machine.

If everyone were to get together they could build an awesome bike of amazing engineering and quality.

Sadly it would look awful on the basis one individual would to make chopper forks, another would do a STriple type frame, another a psychedelic colour scheme with white walled tyres, mirrors like Micky’s ears, etc, etc.

Since we can’t often agree on what day it is, it would be nearly impossible to agree on a design.

The result would probably be uglier than a mix of these…

 

A camel was a horse built by a committee

 

Fitted rad and oil cooler guards today.

 

Its a touch windy out there in our neck of the woods today,, but lovely to be out on two wheels nonetheless.

 

Removed the cracked exhaust manifold from the Explorer.
Metal very thin around the welds of balance pipe and not worth trying to get it welded.
Trying to source a cheaper alternative to the OEM replacement, only found Lextek so far at £300 currently out of stock and they might have some by late October. Anyone here know of any other options?

 

Yeah, back to plan A, silver or lead solder until you can get the replacement, though personally I would weld it, it cannot be too thin to weld as someone has already managed it.

 

@Koko55, I live many miles from you and I still have to put my shades on when you head out for a ride.

Subtle and subdued are two words never used to describe that bike.

I love it!



Please just keep it in Dorset…

 

Do what @PatW said.