2020 Speed Twin Pc5 And Custom Dyno Map.

Today I bit the bullet and had a Power commander fitted and three hours tuning on a dyno.
Cost me a bundle and I was genuinely nervous that I had just thrown away a whole load of cash!
All I can say is if your considering it it’s very worth it,
It’s so smooth now, no decel popping, 7 b.h.p increase , 8 ft lbs of torque increase, with improvements throughout the Rev range.
I can thoroughly recommend Steve Jordan motorcycles in the UK, he knows his stuff!
Be warned there’s around 3 months waiting list however!

 

It came to a grand total of £770,
I did have a few other bits done as well, Without those it was around £740.

 

Your right and it has, they have documented all the improvements through the Rev range.
I am genuinely impressed with the difference it has made, it is so nice to ride. I’m happy without the popping!

 

It sits on top of the battery, they are quite small these days. ill pop a picture on later.

 

Thruxton pipes, decat, and air filter, the one thing I neglected to mention was that prior to the pc I had the intermittent stall that a lot of bikes suffer from, since the pc it hasn’t happened. Fingers crossed that’s a fix for that as well.

 

Thruxton pipes, decat, and air filter, the one thing I neglected to mention was that prior to the pc I had the intermittent stall that a lot of bikes suffer from, since the pc it hasn’t happened. Fingers crossed that’s a fix for that as well.

 

Nope but copper grease on the back of the pads did!