Tiger 900 Gt Tail And Stop Light Wires

Discussion in 'Technical Help' started by azokie, Jan 7, 2021.

  1. azokie

    azokie New Member

    Oct 23, 2020
    10
    3
    Oklahoma
    #1 azokie, Jan 7, 2021
    I want to install an aux tail light/stop light and turn signal light on my Tiger 900 gt pro. Like the Admore Light Bar. To do so, I need access to tail light and stop light wires. Anyone have pictures or information on how to access the respective wires?
     
    • Like Like x 1
  2. Hamish

    Hamish New Member

    Nov 8, 2020
    21
    3
    Selkirk, Scottish Borders
    #2 Hamish, Jan 12, 2021
    Azoki,

    Lift off the passenger seat and the wires are in front of you.

    Stop tail is a 3 wire plug (black + 2 other colours).

    Indicator wires are the two, two wire cables on each side of the stop tail plug. Try them in turn. Disconnect a plug try the light to see if it works (e.g. disconnect the 3 wire stop/tail) if it doesn't then you have proved what that connection is.
    I use the tail light wire, which is a switched live wire, to trigger a power distribution relay.

    Hope that helps.

    Hamish.
     
    • Like Like x 4
  3. azokie

    azokie New Member

    Oct 23, 2020
    10
    3
    Oklahoma
    #3 azokie, Jan 12, 2021
    Harnish. Great info. I saw that black plug but it did not have enough wires, in my opinion, to be stop light and tail light and turn signals. But I read that the turn signal (indicators) are along side so I will have detailed look. I think I will lift the tray so I can get a better view and have some room to work the plugs. Thanks again. AZOKIE

     
    • Like Like x 1
  4. azokie

    azokie New Member

    Oct 23, 2020
    10
    3
    Oklahoma
    #4 azokie, Jan 13, 2021
    Another question. My dealer says that the 2020+ 900 gt pro has some low voltage circuits protected by a linbus--similar to canbus (like in BMW). Usually when there is some form of ECU (computer assisted voltage protection like in BMW) there will not be a fuse. The Tiger 900 has fuses for the stop light (brake light) and indicators front and rear. That indicates to me that the brake light and indicators are not protected by a low voltage linbus. Any comment concur or not. I do not want to tap into the wires and cause a fault. AZOKIE
     
  5. Ducatitotriumph

    Ducatitotriumph Crème de la Crème

    Apr 25, 2019
    2,185
    1,000
    Rothwell
    #5 Ducatitotriumph, Jan 13, 2021
    Get a hire bike, take it home and perform surgery on it to test!!!??? ;);):):)
     
    • Funny Funny x 1
  6. dilligaf

    dilligaf Guest

    #6 dilligaf, Jan 13, 2021
    I had a 2018 Speedmaster that was supposed to be fitted with canbus/linbus or something :confused:
    I made a tow bar for it and had to tap into the rear lights and indicators to power the lights on my trailer :)
    Never had any problems with any electrical systems after doing it :)
     
    • Like Like x 1
    • Informative Informative x 1
Loading...
Similar Threads - Tiger 900 Tail
  1. Prassi

    Help Needed To Install Heated Grips On Tiger 900 Gt

    Prassi, Sep 13, 2025, in forum: Technical Help
    Replies:
    7
    Views:
    334
    David£25
    Sep 25, 2025 at 3:54 PM
  2. Tiger_717

    Tiger 900rp Suspension Problem

    Tiger_717, Sep 2, 2025, in forum: Technical Help
    Replies:
    12
    Views:
    689
    Pegscraper
    Sep 8, 2025
  3. Pedro1340

    Tiger 800 Tiger 900 Trip Reset

    Pedro1340, Aug 14, 2025, in forum: Tiger / Explorer
    Replies:
    10
    Views:
    730
    Pedro1340
    Aug 18, 2025
  4. Older'nWiser

    Tiger Explorer Tiger 900 Rally Pro Immobilizer

    Older'nWiser, May 18, 2025, in forum: Tiger / Explorer
    Replies:
    3
    Views:
    698
    Older'nWiser
    May 20, 2025
  5. DenisTiger85

    Tiger Explorer Tiger 900 Gt Pro Tank Stickers

    DenisTiger85, May 6, 2025, in forum: Tiger / Explorer
    Replies:
    1
    Views:
    398
    Regit nogara
    May 11, 2025

Share This Page

Sign up