Valve Compressor Dimensions Triple (t595)

Hi
Does anyone who’s removed the valves from a 955 triple head know, or are able to confirm, that the dimensions of this valve spring compressor are within range?
PS still battling with head bolts but I’m positively thinking ahead

 

Do you need to get the valves out ? Because there is a different tool if if you just need to change the shims if the valves have stretched.

 

Hi, Ivor...yes, removal of the valves to reseat them whilst I have the head off.

 

Looking at the compressor you have you should be able to get it to fit, there is plenty of adjustment on either end of the compressor.

 

Thank you so much for posting, truly appreciated. Have a great Christmas.

 

I used a compressor virtually identical to that to rebuild a Z1000 head years ago which will have similar dimensions. They're a generic tool with plenty of adjustment so should be fine IMO.

 

Many thanks, Pegscraper...I’m going to buy it!
Wishing you and yours a very merry Christmas.

 

Merry Christmas too, good luck and let us know how you get on with the valves ☺

 

Thanks, Ivor...will keep you posted on here! Have a great couple of days!