hi all , just bought this little project, 1991 only 10,000 miles. cable clutch, only problem is with the clutch lever fully pulling in, only release a very small amount and she's away, can there be any adjustment to give a bitting point a bit further away maybe 1/4 to 1/2 way through the lever travel?? anyone know.
Nice bike Malcolm Isn’t there an adjuster at the lever end of the cable? Let’s see a picture of it mate.
Just found this very informative site for you. Might prove very useful http://www.thisoldtractor.com/moto_guzzi_small_blocks.html
Great bike @Malcolm Woods I had one similar, there should be adjustment at the handle bar as already mentioned, you could also adjust clutch, use the manuals provided by @freck
this will be an adjustment at the clutch leaver as stated ,most bikes also have an adjuster down on the motor where the clutch cable pulles in the clutch if you can't get enough adjustment you have a streached cable
Hi Malcolm, if this is your first Goose, congrats! It's really great looking! They can be a bit addicting; I've had two. The best Guzzi forum out there is GuzziTech, based in SoCal. Very active membership, and headed up by a top notch expert in all things Moto Guzzi. Here's the link: https://www.guzzitech.com/forums/