T120/tr6 Subframe Help Please

I’m trying to get a chopped TR6 back on the road.

I have sourced a rear subframe (which I think is correct for the bike/year) but it has had the rear loop cut off.

I was hoping some kind resident here would be able to measure their rear subframe loop from the back end of the suspension mounts to the most rearward part... either in metric “mm” or inches...either would be fine.

subframe came with a swingarm (which I know is not correct) but this is about 4 inches too long.... maybe from a t160?..... was hoping to find out what bike that came off so I can sell it on with a correct description.


But the rear frame loop measurement is my most pressing need.

Many thanks in advance.

Dave (Sunny Surrey, UK)

 

Eric, thanks for your reply.
Just one more daft question...
What diameter is the rear bend... ie; where the bend becomes straight (if that makes sense to you) what is the width from outside to outside.
I just need to know what curve the rear needs as I doubt that the rear loop is exactly parallel all the way as the seat curves in at the back.

I do hope you can understand what I’m getting at, even if I haven’t explained it very well.

thanks

dave

 

that is fantastic.
Many thanks

Dave