Speed Triple Rs Service Manual.

Aren't the torques for removing the wheels in the owners handbook?

 

Not that I can find. That’s why I downloaded those pages and more from the service manual.

 

Here is that page.

 

Hi there,
Rs 18 model. I bloody love it (no qs BUT I have had the gearbox bang without one on it )

 

Haven't seen the manual in question but Ohlins forks were fitted to pre 2018 Speed Triple R's too, there are seperate sections in my service manual for the R forks etc. (my 94R has black anodised Ohlins identical to the later bikes).
It is critical that the pinch bolts on Ohlins forks are not over tightened, there have been cases primarily on Ducatis, of the lower casting cracking due to this. One of the reasons why I would never take my bike to a tyre depot for wheel removal.

 

Very good info, its these sort of things that I want the real workshop manual for. Or a manual that cover the years of the bike.
Things has changes throughout the years and its important that stuff like the right torque is applied.

 

Then your caliper torque setting is 55nm.

 

@SteveRS

Was it tricky to download the papers.
Do you need to save every individual paper as a separate PDF. Or can you do a printout to PDF of the whole document?

 

It was a while ago so I don’t quite remember exactly how it was done. But I believe you just save them as you went along. It was pretty easy for the most part. Here is the link.https://www.tritun.net/tritun/vehicle/lookupForm