Featured Gpr Powercone Low Can Installed

Discussion in 'Speed Triple' started by Allan Engel, Mar 2, 2020.

  1. Allan Engel

    Allan Engel Well-Known Member

    Sep 16, 2018
    56
    68
    Boulder, Colorado USA
    #1 Allan Engel, Mar 2, 2020
    Recently purchased & mounted a GPR Powercone low can to my 2019 'RS.' It exposes the carbon rear mudguard & follows the lines of the wheel. I didn't compare the weight of old vs new but I'm guessing it's substantial. I bought the kit advertised for model years 2011-2015 because it was half the price (310 USD) of the latest EVO5 version. Not sure what the differences are. The supplied hanger did not work. I cut it down, drilled some holes...you can't even notice it. The sound (dB killer installed) is close to the OE Arrow system. At idle & blipping the throttle it is possibly a tad more loud. Hitherto I have not rode the bike but will once the snows disappear & the roads dry out a bit.

    P2180011.JPG

    P2180008.JPG

    P2180007.JPG
     
    • Like Like x 12
  2. Angus

    Angus Noble Member

    Mar 19, 2017
    936
    300
    South Africa
    #2 Angus, Mar 3, 2020
    That does look good Allan, it follows the line nicely. Well done mate !
     
    • Agree Agree x 2
  3. Foxy1

    Foxy1 Crème de la Crème

    Aug 31, 2018
    1,251
    1,000
    Sheffield
    #3 Foxy1, Mar 3, 2020
    Looks reyt nice that, mate.
     
    • Agree Agree x 2
  4. Vulpes

    Vulpes Confused Member

    Mar 14, 2018
    20,020
    1,000
    Netherlands
    #4 Vulpes, Mar 4, 2020
    I personally favour the twin high cans, but that looks brutal!
     
    • Agree Agree x 2
  5. Bryf

    Bryf Guest

    #5 Bryf, Mar 4, 2020
    Lovely mate, if it sounds as good as it looks your on a winner!!!!!
     
  6. Ducatitotriumph

    Ducatitotriumph Crème de la Crème

    Apr 25, 2019
    2,187
    1,000
    Rothwell
    #6 Ducatitotriumph, Mar 4, 2020
    Looking great! Apart from the hanger, was the diameter of the pipe connectors ok? I understand the heat shielding had to go
     
  7. chuk

    chuk Senior Member
    Subscriber

    Jan 10, 2017
    350
    113
    neilston glasgow
    #7 chuk, Mar 8, 2020
    I’ve had the twin can GPRs did like the look and build,but way too loud even with the dB killers fitted sold and bought scorpions
     
  8. Allan Engel

    Allan Engel Well-Known Member

    Sep 16, 2018
    56
    68
    Boulder, Colorado USA
    #8 Allan Engel, Mar 9, 2020
    The Arrow twin-cans are sitting on the self. I'll hang onto them albeit I have little reason to think I might swap back. Hitherto there is nothing I dislike about the GPR can.
     
  9. Allan Engel

    Allan Engel Well-Known Member

    Sep 16, 2018
    56
    68
    Boulder, Colorado USA
    #9 Allan Engel, Mar 9, 2020
    The diameter of the 'pipe connector' & the curves, i.e. shape are spot-on. The exhaust springs fit perfectly. Only the hanger didn't work - not even close.
     
    • Thanks Thanks x 1
  10. Allan Engel

    Allan Engel Well-Known Member

    Sep 16, 2018
    56
    68
    Boulder, Colorado USA
    #10 Allan Engel, Mar 9, 2020
    The diameter of the 'pipe connector' & the curves, i.e. shape are spot-on. The exhaust springs fit perfectly. Only the hanger didn't work - not even close.
     
    • Thanks Thanks x 1
  11. feckless

    feckless Noble Member

    Apr 16, 2019
    1,047
    443
    Cumbria
    #11 feckless, Mar 10, 2020
    I have GPR can on my DRZ and I find it very loud with the DB Killer in. Not massively impressed by the build quality to be honest. the matt black finish is flaking. will keep it till it falls apart though :):)
     
  12. OhCrumOn

    OhCrumOn Well-Known Member

    May 2, 2019
    102
    83
    Phila
    #12 OhCrumOn, Mar 10, 2020
    Thing looks killer!
     
  13. chuk

    chuk Senior Member
    Subscriber

    Jan 10, 2017
    350
    113
    neilston glasgow
    #13 chuk, Mar 10, 2020
    Agree to an extent the black finish is not exactly hard wearing,easy to repaint but should be better coating imho,you can get discounted on their website sometimes.
     
    • Useful Useful x 1
Loading...
Similar Threads - Gpr Powercone Low
  1. Screwball

    GPR Powercone Exhaust

    Screwball, Apr 21, 2013, in forum: Speed Triple
    Replies:
    34
    Views:
    6,121
    Screwball
    Jul 28, 2013
  2. Rick2nds

    Tiger Explorer Gpr Muffler

    Rick2nds, Mar 25, 2025, in forum: Tiger / Explorer
    Replies:
    1
    Views:
    639
    joe mc donald
    Mar 30, 2025
  3. chuk

    Gpr Low Can

    chuk, Sep 28, 2017, in forum: Speed Triple
    Replies:
    0
    Views:
    895
    chuk
    Sep 28, 2017
  4. chuk

    Gpr Nero Furore Exhaust

    chuk, Jun 13, 2017, in forum: Parts, Accessories & Clothing
    Replies:
    4
    Views:
    1,907
    Callumity
    Jun 26, 2017
  5. chuk

    Gpr furore Nero cans

    chuk, Apr 25, 2017, in forum: Clothing & Gadgets
    Replies:
    10
    Views:
    3,415
    chuk
    Apr 29, 2017

Share This Page

Sign up