Featured Tt600 Resurrection

Hi All, just got this 2001 tt600 a couple of weeks ago.

it came with all the plastics, some with minor damage .
missing a bunch of parts mainly fuel/air side of things.
got lucky and snagged a small hoard of parts relatively local .
(airbox,clocks,exhaust,seat,lights,ecu,regulator,front end minus the wheel,swingarm,rear wheel,brakes front and back, switch gear and some other bits and pieces)all for $100.
still need a tank and its fuel pump etc,
both foot pegs and hangers .
muffler/end can.
a lock set inc tank cap
i see the "speed four" share a lot of parts but the gas/petrol pump seems different as in the connections on the base plate ,if some one could educate me that would be great.
so i will be post pics and asking questions as i go.
cheers mark

 

QUICK QUESTION i can see 4 number/letters on the spare ignition key barrel.
is that all there is and can i get a key cut to suit ?
TIA Mark

 

There are a few around houston/dallas are none on the road ,mostly wrecks for around $800/$1200 ..

 

I CHECKED THE gearbox oil on a paddock stand and the PO had filled it to the brim when on the side stand.
i emptied 2 gallons out and replaced it with the standard 1 gallon .

 

well i thought i had got a great deal on a NIB OEM silencer.
but alas it was mis described and is for the 2003/2005 600/650 daytona..
the return shipping is more than i want to pay so option 1 make a short strap/bracket and us it might need remapping but probably not.
option 2 shelve it and there is a scorpion aftermarket can for a reasonable price.on flea bay.
also i searched for footpegs and a right side hanger(mine is damaged) to no avail so will attempt to effect a weld/re machine repair.
fitted a generic left peg after making a couple of nylon bushings .
right side is welded ready for abuse on the mill.

 

Next question,,i have 2 electrical plugs under the tank area both have 2 wires
#1 has orange with black stripe and plain orange wires.
#2 has thicker wires yellow with orange stripe and plain brown.
i think one goes to the air sensor under the airbox dont know what the other goes to maybe a code reader ?.
any help is appreciated
T I A Mark

 

hi All ,
well i got a tank and fuel pump assembly throttle position sensor and was able to give it a try starting .
no joy .. it will start and rev then die if i use some starter fluid .
but the best i can get without is sounds like its running on 2 cylinders and will not rev and will not idle.
i got this as a basket case so not suicidal
any help is mucho appreciated.
thanks mark

 

Anyone know if the injectors are serviceable ?
Thanks mark

 

well hi again ,hope your all keeping safe .
trying to fit the tank filler cap, i need to find the seal that goes between the cap and tank.i have two different seals one i think is for a daytona 675 and the other is for a 1050 i think any one have a pic of what it should look like.

 

think i found the root cause of the non start condition.

are the injectors servicable or do i need new ones.
as always all help is appreciated .cheers mark
and as they said on "hill street blues"
stay safe out there!!!!

 

Thanks for the help i will try cleaning them while i search for replacements
anyone know how to test them ??
mark