Clicking Sounds T100

Discussion in 'Bonneville' started by Guillermo salinas, Dec 3, 2019.

Page 1 of 2
  1. Guillermo salinas

    Guillermo salinas Well-Known Member

    Aug 17, 2019
    161
    93
    Azusa
    #1 Guillermo salinas, Dec 3, 2019
    After riding, I noticed my T100 is making ticking sounds and a weird metal Clank sound. I don't know to this out while riding only after riding. I had recently clean the chain and lubed it.. is the metal expanding due to heat? I have never heard this sound before. The forum did not allow me to upload a sound file. I can email you the file directly so you can listen to it, thank you for your feedback.
     
    • Useful Useful x 1
  2. thebiglad

    thebiglad Old fart, still riding !

    Sep 25, 2013
    5,072
    1,000
    Central France
    #2 thebiglad, Dec 3, 2019
    Hi Guillermo, you're not talking about the ticking noise an engine makes during the cool-down after a spirited ride are you?

    If you are, this would be perfectly normal?
     
    • Agree Agree x 3
  3. joe mc donald

    joe mc donald Joe
    Subscriber

    Dec 26, 2014
    16,077
    1,000
    slough / burnham
    #3 joe mc donald, Dec 3, 2019
    Yes I agree. My 2010 bonnie ticks a knocks for ages after a good ride out. Even the can crack and tink for a while. Just the beast cooling down.
    Regards
    Joe.
     
    • Agree Agree x 1
  4. Callumity

    Callumity Elite Member

    Feb 25, 2017
    3,362
    800
    Nr Biggar
    #4 Callumity, Dec 3, 2019
    Mine just groans when I get on and makes a ‘phew’ sound when I get off.
     
    • Funny Funny x 3
    • Like Like x 1
    • Agree Agree x 1
  5. joe mc donald

    joe mc donald Joe
    Subscriber

    Dec 26, 2014
    16,077
    1,000
    slough / burnham
    #5 joe mc donald, Dec 3, 2019
    Callumity.
    Don't know what you mean. You being a lean mean riding machine.
    Regards
    Joe.
     
    • Funny Funny x 2
  6. thebiglad

    thebiglad Old fart, still riding !

    Sep 25, 2013
    5,072
    1,000
    Central France
    #6 thebiglad, Dec 3, 2019
    Last edited: Dec 3, 2019
    That wasn't a hint of sarcasm was it Joe? You know that we "biglads" are a sensitive bunch :sob::sob::sob::sob::sob::sob::sob:
     
    • Like Like x 1
    • Funny Funny x 1
  7. joe mc donald

    joe mc donald Joe
    Subscriber

    Dec 26, 2014
    16,077
    1,000
    slough / burnham
    #7 joe mc donald, Dec 3, 2019
    Thebiglad.
    I apologise whole heartedly if I upset some one. No it's just Irish sense oh humour. You chaps are the tops and I respect you all.
    Regards
    Joe.
     
    • Like Like x 1
    • Love You Love You x 1
  8. thebiglad

    thebiglad Old fart, still riding !

    Sep 25, 2013
    5,072
    1,000
    Central France
    #8 thebiglad, Dec 3, 2019
    Oh alright then, you cuddly little bunny !!!!!!!:heart_eyes::heart_eyes::heart_eyes::heart_eyes::heart_eyes::heart_eyes:
     
    • Like Like x 1
    • Funny Funny x 1
  9. curly

    curly Noble Member

    Jul 3, 2016
    758
    443
    Burton Upon Trent
    #9 curly, Dec 3, 2019
    If it doesn't tick the problem is with the rider, not the bike;)
     
    • Like Like x 1
  10. joe mc donald

    joe mc donald Joe
    Subscriber

    Dec 26, 2014
    16,077
    1,000
    slough / burnham
    #10 joe mc donald, Dec 3, 2019
    Thebiglad
    Glad you accepted as I would hate to hurt anyone. You are my family.
    Regards
    Joe.
     
    • Like Like x 1
    • Love You Love You x 1
  11. Guillermo salinas

    Guillermo salinas Well-Known Member

    Aug 17, 2019
    161
    93
    Azusa
    #11 Guillermo salinas, Dec 6, 2019
    I get some of the ticking but I get a fairly loud metal clank every 45 seconds or so... I also removed the front sprocket cover and found this bent part. Is this is concern? Is anyone will for me to email directly a wav sound file? I also cleaned and lubed the chain.

    20191205_135157.jpg
     
    • Like Like x 1
  12. Guillermo salinas

    Guillermo salinas Well-Known Member

    Aug 17, 2019
    161
    93
    Azusa
    #12 Guillermo salinas, Dec 6, 2019
    It is plastic

    20191205_135209.jpg
     
    • Like Like x 1
  13. alfie

    alfie Getting older but still going for it
    Subscriber

    Jan 27, 2018
    384
    213
    Bath, Zumerset
    #13 alfie, Dec 6, 2019
    It's the retaining lock washer. No concern.
    Alfie
     
    • Agree Agree x 3
    • Like Like x 1
  14. thebiglad

    thebiglad Old fart, still riding !

    Sep 25, 2013
    5,072
    1,000
    Central France
    #14 thebiglad, Dec 6, 2019
    Hi GS, that bent piece is called a "lock washer" and is bent over to ensure the retaining nut does not unscrew itself. It needs to be like that.

    Dave
     
    • Agree Agree x 2
    • Like Like x 1
  15. Callumity

    Callumity Elite Member

    Feb 25, 2017
    3,362
    800
    Nr Biggar
    #15 Callumity, Dec 6, 2019
    Guillermo, what is your chain tension like? Can you pull the chain off the rear sprocket to any degree? I am wondering if you have a bit of chain lash on an ageing chain that is striking the underside of the chain guard. The gearbox sprocket appears to be developing flat valleys rather than the symmetrical U shapes it had when new. The same may be happening on the rear but less pronounced.
     
    • Like Like x 1
    • Agree Agree x 1
  16. thebiglad

    thebiglad Old fart, still riding !

    Sep 25, 2013
    5,072
    1,000
    Central France
    #16 thebiglad, Dec 6, 2019
    Hi Callumity, Guillermo said these noises happen AFTER a ride. Just sayin'...
     
    • Agree Agree x 1
  17. Callumity

    Callumity Elite Member

    Feb 25, 2017
    3,362
    800
    Nr Biggar
    #17 Callumity, Dec 6, 2019
    I know what he wrote....... but we may be guilty of taking him too literally! I have never known a stationary machine clank! The cooling tinkling is normal enough but a clank needs something moving!
     
    • Agree Agree x 1
  18. joe mc donald

    joe mc donald Joe
    Subscriber

    Dec 26, 2014
    16,077
    1,000
    slough / burnham
    #18 joe mc donald, Dec 6, 2019
    Guillermo salinas
    You want to download a sound bite. Put it on you tube then transfer it to the forum.
    Regards
    Joe.
     
  19. joe mc donald

    joe mc donald Joe
    Subscriber

    Dec 26, 2014
    16,077
    1,000
    slough / burnham
    #19 joe mc donald, Dec 6, 2019
    Guillermo salinas
    Check that chain there is no tight spots on there. Also check it is not hitting the brake arm there especially if there is a tight spot chain may be jumping on the sprocket.
    Regards
    Joe.
     
  20. Guillermo salinas

    Guillermo salinas Well-Known Member

    Aug 17, 2019
    161
    93
    Azusa
    #20 Guillermo salinas, Dec 7, 2019
    I agree that's what it look like, but I cleaned everything so there is nothing there. again the Clank occurs after I'm done riding and the bike is cooling....
     
Page 1 of 2
Loading...
Similar Threads - Clicking Sounds T100
  1. Dave Harris

    Rear Clicking Sound

    Dave Harris, Sep 4, 2023, in forum: Technical Help
    Replies:
    6
    Views:
    1,789
    Iceman
    Sep 11, 2023
  2. JohnRS00

    Sprint Rs (2000) Rumble / Noisy Clicking When Riding And Clutch Is Engaged

    JohnRS00, Oct 27, 2022, in forum: Sprint & Trophy
    Replies:
    0
    Views:
    619
    JohnRS00
    Oct 27, 2022
  3. Jay Vey

    Clutch Handle/lever Clicking

    Jay Vey, Jul 12, 2022, in forum: Technical Help
    Replies:
    4
    Views:
    1,343
    TimmyTheHog
    Jul 12, 2022
  4. Luke7ucas

    Triumph Sprint Rs 955i - Fuel Pump Not Priming, No Clicking

    Luke7ucas, May 9, 2020, in forum: Technical Help
    Replies:
    6
    Views:
    5,898
    capt
    Jun 25, 2020
  5. Camilo

    1050 Triple (2010) Not Starting, Only Clicking

    Camilo, Feb 27, 2019, in forum: Technical Help
    Replies:
    49
    Views:
    17,965
    Bernie H
    Nov 4, 2023

Share This Page

Sign up