Quick Release Chuck Key

Discussion in 'Lounge' started by curly, Nov 13, 2019.

  1. curly

    curly Noble Member

    Jul 3, 2016
    758
    443
    Burton Upon Trent
    #1 curly, Nov 13, 2019
    Hoping someone might be able to assist me here?
    I've acquired a Parkside PFS 710 A1 sabre saw, Lidl brand of course.
    It's almost new and had very, very little use.
    There are no instructions in the box and it's not possible to speak with the original owner at all.
    I have been looking at the user manual on the internet to try to find out how to insert the blades into the chuck.
    They state:
    Turn the quick release chuck and hold it in the turned position
    Press the selected saw blade upto the stop into the quick release chuck. The saw blade should engage.
    Release the quick release chuck. The chuck must then return to its original position. The saw blade is now locked in place.

    Trouble is I can't budge the quick release chuck!
    Anyone familiar with this budget priced tool and how to deal with the chuck?
    Any topical suggestions welcome
    Curly
     
    • Agree Agree x 1
  2. StrippleMont

    StrippleMont Senior Member

    Nov 5, 2016
    349
    220
    Round your way!
    #2 StrippleMont, Nov 13, 2019
    Had similar problem with Lidls impact gun, got the bit in, but could not get the bastid out......Grrr
    Had to use a pair of mole grips to pull it out whilst twisting the chuck. As DD said, use penetrating oil think he means WD40...... not the gay stuff!:p
     
    • Funny Funny x 3
    • Thanks Thanks x 1
    • Agree Agree x 1
  3. curly

    curly Noble Member

    Jul 3, 2016
    758
    443
    Burton Upon Trent
    #3 curly, Nov 13, 2019
    No, but I'll squeeze a some on tonight and leave it go to work overnight, good idea thanks DD.
    It feels as though the chuck is locked in position, although I'm no Charles Atlas I can usually deal with twisting mechanisms.
     
    • Agree Agree x 1
  4. curly

    curly Noble Member

    Jul 3, 2016
    758
    443
    Burton Upon Trent
    #4 curly, Nov 13, 2019
    Well I've got good old fashioned 3 in 1 oil and WD 40, think I'll dust off the 3 in 1 though
     
    • Like Like x 1
    • Agree Agree x 1
  5. joe mc donald

    joe mc donald Joe
    Subscriber

    Dec 26, 2014
    16,043
    1,000
    slough / burnham
    #5 joe mc donald, Nov 14, 2019
    Curly
    When were you hoping to ride it. Try tapping the blade gently in to try and release the locking mechanism. And make sure its all clean in there.
    Regards
    Joe.
     
  6. curly

    curly Noble Member

    Jul 3, 2016
    758
    443
    Burton Upon Trent
    #6 curly, Nov 14, 2019
    Been baby sitting Grandson all day and away from home
    Doused in 3 in 1 again this morning before we left home at 6am
    Just got in after an horrendous drive home, white water rapids some roads between Leicester and Burton, so not in the mood to mess with the saw
    I'll douse it again tonight when I've finished recovering with the Appletons and have a look see tomorrow.
    Thanks for the input Joe, I'll check that out.
     
    • Like Like x 2
  7. joe mc donald

    joe mc donald Joe
    Subscriber

    Dec 26, 2014
    16,043
    1,000
    slough / burnham
    #7 joe mc donald, Nov 14, 2019
    Curly
    Not that its much help but I have found it sometimes helps. I do hope you get in there tomorrow and the chuck is lying beside the saw waiting for you. Grandkids don't you just love them. I can't get enough of mine.
    Regards
    Joe.
     
    • Like Like x 2
    • Agree Agree x 2
  8. Dartplayer

    Dartplayer Crème de la Crème

    Aug 8, 2018
    7,965
    1,000
    New Zealand
    #8 Dartplayer, Nov 15, 2019
    Hi Curly, not sure if it applies to your model, but mine needs to be extended. This requires triggering the mechanism until it is fully out and then listening the chuck key to pop the blade in.
    Best of luck.
     
    • Agree Agree x 1
  9. Dartplayer

    Dartplayer Crème de la Crème

    Aug 8, 2018
    7,965
    1,000
    New Zealand
    #9 Dartplayer, Nov 15, 2019
    Hi Curly, not sure if it applies to your model, but mine needs to be extended. This requires triggering the mechanism until it is fully out and then losening the chuck key to pop the blade in.
    Best of luck.
     
    • Thanks Thanks x 1
    • Agree Agree x 1
  10. curly

    curly Noble Member

    Jul 3, 2016
    758
    443
    Burton Upon Trent
    #10 curly, Nov 16, 2019
    Eureka, 48 hours bathing in 3 in 1 oil has done the chuck the world of good, after a careful wiping clean and dry it opened nicely, blades in and out with no trouble at all!
    Thanks to all for your interest and suggestions.
    Curly
     
    • Like Like x 4
    • Agree Agree x 1
  11. Old phart phred

    Old phart phred Noble Member

    Jun 23, 2019
    1,079
    443
    Ks
    #11 Old phart phred, Nov 16, 2019
    Pick up a can of dry Teflon spray lube. It works great and sawdust, and other grime won't stick to it.
     
    • Agree Agree x 3
    • Like Like x 1
  12. Eldon

    Eldon Crème de la Crème

    Nov 14, 2018
    9,391
    1,000
    North Yorkshire
    #12 Eldon, Nov 16, 2019
    Ah a bit of lube soon sorts your saw problems out.
    Good luck in the future now you know :p
     
    • Agree Agree x 1
  13. joe mc donald

    joe mc donald Joe
    Subscriber

    Dec 26, 2014
    16,043
    1,000
    slough / burnham
    #13 joe mc donald, Nov 16, 2019
    Curly
    Great. You will have to work now.
    Regards
    Joe
     
  14. curly

    curly Noble Member

    Jul 3, 2016
    758
    443
    Burton Upon Trent
    #14 curly, Nov 17, 2019
    There's always more to do Joe!
     
    • Like Like x 1
Loading...
Similar Threads - Quick Release Chuck
  1. Bucky

    Thunderbird Quick Release Screen

    Bucky, Feb 12, 2022, in forum: Parts, Accessories & Clothing
    Replies:
    0
    Views:
    730
    Bucky
    Feb 12, 2022
  2. Burny_13

    Quick Release Riders Seat

    Burny_13, Sep 10, 2020, in forum: Speed Triple
    Replies:
    2
    Views:
    1,375
    Stephen Martin
    Sep 10, 2020
  3. Thomas Blair

    Genuine Triumph Quick Release Screens With Brackets And Chrome Grab Rail

    Thomas Blair, Sep 2, 2019, in forum: Parts, Accessories & Clothing
    Replies:
    0
    Views:
    814
    Thomas Blair
    Sep 2, 2019
  4. Riddick

    Quick Release Fuel Connector

    Riddick, Jan 22, 2019, in forum: Wanted
    Replies:
    1
    Views:
    1,056
    Rocker
    Jan 22, 2019
  5. Kchris

    Quick Release Tank Bag Part A9510410 For Sale.

    Kchris, Nov 15, 2018, in forum: Parts, Accessories & Clothing
    Replies:
    0
    Views:
    1,256
    Kchris
    Nov 15, 2018

Share This Page

Sign up