Featured Handlebar Risers.

Handlebars on the T120, nice and solid, bit too narrow for me but getting use to it. Main problem is that they are too low!
Looked around for risers or spacers, cheapest were £40 for 2 bits of turned alloy and some old looking bolts.
Lucky I work in a toolroom .
Measured some dimensions and made these. I bought a couple of titanium bolts and here we have it 25 mm rise on the bars, lovely position now.

 

Thanks, I did something similar on another forum and nothing came of it.

 

Hi,
I made another pair this morning.
I'm waiting to place the order for bolts.
I would like to sell say 10 sets over a small period due to being busy.
My price will be around £30 plus post a set and proceeds will go to the Distinguished Gentleman's Fund.

 

Doh, where were you when I dropped £55 on exactly the same

 

Quality item and a nice idea

 

Too low? You should try the bloody R Nine T !

 

You got the wrong bike

 

They want you always to be able to kiss the badge without moving your head an inch...

 

Or to be bent over to receive the maintenance bill...

 

Ahhh, but other forums pale in comparison to The Triumph Forum, Cupoftea!!

 

That is terrific that you are donating the proceeds to the Distinguished Gentleman's Fund, Cupoftea! A very worthy cause. I'm riding in it again this year and it's coming up soon--a week from Sunday! Beautiful risers--beautiful workmanship.

 

Excellent modification i ended up with the riser blocks from square deals on the thruxton but yours look much neater fair shout to you for donating the proceeds.

 

Thanks, well buy mine and sell those funny things.

 

your absolutely right please put my name on the list as its going to a good cause you can drop me a pm with the payment details ect and i can fire you my address across cheers,

 

I noticed that your mounts are smaller in diameter, the ones I've made are 33mm. Do you want another size to suit?

 

Hi mate well spotted i just looked at your pic again as you have the T120 totally different headstock setup I have just used a vernier gauge and measured at the lowest point of the base 21.50 mm and the current blocks are the same one inch rise shall i whip it apart in the morning and pm you some more accurate measurements or will this do as not sure of the indent under the bolted original mounts,
cheers, Nick

 

If they are just straight spacers then no problem, obviously cost will be less as no bolts required. If they are shaped in any way, let me know the sizes and I can machine them in.

 

Thanks I reckon the bolts will be too short looking at it all so ill strip it in the morning easy enough and suss it up cand send some pics also if that helps
thanks

 

No problem, let me know the original bolt length.

 

Sure thing will doi measure it all up first thing tomorrow bloody lights gone now