Featured Any Interest In A How-to Guide?

Afternoon all,

Having been on a bit of an ebay spending spree, I'll shortly (in the next couple of weeks, hopefully) be taking to the toolkit and attempting to fit an Arrow lowboy exhaust full system, a Power Commander, and a K&N air filter to my 2017 Speedy R.

Had a bit of a search and a browse and couldn't find any guides on how people have fitted these, but happy to take a few photos and do a write up if anyone is interested.

 

Thanks for that. Turns out I've been sent the wrong filter so will have to save that for another day!

Have managed to get the new headers on but it was a bit of a nightmare, not least because I think the instructions are misleading... following this part of the instructions (attached) to the letter and attempting to torque up the mounting fixings has bent them - of course, it makes sense that doing it as described has bent them as they would be wound tight in one direction by tightening the top bolts only first, but they would not be square to the engine, hence when then tightening the bottom bolts it has bent them.

I'm now afraid I've completely f***ed it. Any advice?

 

Ebay! Turns out it is actually the model for the Speed 94, but aside from the silencer hanger everything else seems to fit as it should.

I did take a good few photos of the install so will write it up when I can... to be honest though, most of what you need to do is already covered by 'Not a Motorcycle Mechanic' on YouTube so I won't repeat what he has already done on his channel. And everything else will end up being more of a How Not To guide... see my previous post!