Street Twin/scrambler Clutch Cables

Discussion in 'Technical Help' started by Jolly Bodger, Aug 6, 2019.

  1. Jolly Bodger

    Jolly Bodger New Member

    Joined:
    Jul 5, 2018
    Messages:
    11
    Likes Received:
    9
    Trophy Points:
    3
    Location:
    Lancs
    I'm fitting risers to my Street Twin and need a slightly longer clutch cable. Does anyone know the difference in length between the Street Twin and Scrambler cables?

    I've sorted the hydraulic brake hose.

    JB
     
    #1
  2. Tony Richardson

    Tony Richardson Active Member

    Joined:
    Sep 15, 2018
    Messages:
    139
    Likes Received:
    129
    Trophy Points:
    43
    Location:
    Norwich
    I fitted 28mm risers to my ST and am using the standard cables and hoses, all working well, but Triumph don’t give you much slack on the standard stuff.
     
    #2
  3. Jolly Bodger

    Jolly Bodger New Member

    Joined:
    Jul 5, 2018
    Messages:
    11
    Likes Received:
    9
    Trophy Points:
    3
    Location:
    Lancs
    I already have a 20mm spacer under the standard risers but its just not enough. The new risers are about 40mm higher and pull back about 25mm from standard.
     
    #3
  4. Jolly Bodger

    Jolly Bodger New Member

    Joined:
    Jul 5, 2018
    Messages:
    11
    Likes Received:
    9
    Trophy Points:
    3
    Location:
    Lancs
    FYI Scrambler clutch cable is 32mm longer
     
    #4
    • Useful Useful x 1
Loading...

Share This Page