2018 T120 Remap??

Hi Dale
Not as far as I know but I must say that slight lurch on my 2016 T120 was sorted by a Booster Plug. I’m more than happy with how it runs. All the best.

 

It’s dead easy to fit, took me 5 minutes. No retune required. There is good video of installation and review on the Stuart Fillingham you tube channel. Mine cost me £120 if I remember rightly. Description of how it works can be found on the website.
https://www.boosterplug.com/shop/frontpage.html

 

How much would you be prepared to spend on curing the problem?
My 2017 Thruxton R had other issues (stalling) and not a great throttle/fuelling profile. Euro 4 imposes tough targets for these (earlier) engines. A power commander and custom map yielded a beautifully 'elastic' throttle, perfect fuelling and a fat extra wedge of torque just where it's useful most of the time. I think there's no reason why the T120 wouldn't also respond positively to the same treatment.

This is no slight against the booster plug; as far as my problems went it didn't help when I tried one for a while. They're advertised as being a fix for the well documented stalling problems associated with the engine implementation in the Thruxton R but it doesn't work every time for this.

 

Hi Dale
In case you were looking for it this is the Stuart Fillingham video review of booster plug



Enjoy his fine East Yorkshire/ Hull accent!

Mark

 

It would be done on a rolling road so your own engine is optimised. Alternatively, Norman Hyde sell kits which include a map pre-loaded on the Power Commanders. They loaned bikes to Dynojet who developed maps and supply the units ready to install. I bought a kit for my T100, I've been thoroughly pleased with it. Have a look here for interest:https://normanhyde.co.uk/hinckley-triumph/bonneville-t120-2016.html?hinckely_categories=3

 

I have the booster plug and it works well on my machine.
I have k&n filter and decat, with remus pipes. The booster plug does cope well. Ulimatly a remap would be the best option.

 

What's your take on this Kenbro?