New On This Forum

Hi, My name is Dominique, Frenchman but living here in California for the past 30 years. LOVE Triumphs! on my 4th Sprint St and also had a Speed Triple in the past. Doing lots of CUSTOM on these bikes. Sadly, on this last one, I cannot get the starter to click in. I can start with Screw driver across the Solenoid, otherwise nothing. Bike has always been slow on start. would not engage right away and now not cranking at all. Maybe some of you have suggestions? Thanks!!

 

Bonjour Dominique, and welcome in

 

Hello and welcome to the forum Dominique.

 

Hi mate and welcome

 

Good morning Dominique and welcome in. You are in just the right place for good advice. Remember to always ride safe and enjoy!

 

Hello Dominique and welcome to the forum

 

Welcome from San Rafael.

 

Thanks! It is possible, did not think of that. will clean tomorrow and see what happens!

 

Thanks! I look forward to connecting with others

 

Thanks David!!

 

Thanks very much!

 

Thanks! I look forward to being part of this group! !!

 

Thanks! Happy to be here with others who share the same passion !

 

Hi Dominique and welcome to the forum As mentioned, switch is good start point, then battery/starter terminal connections, then leads.
Good luck on your finding the issue

 

Thanks! Yes, might be dirt in switch. Bike has always been hesitant to start since I got it about a year ago and all of the sudden nothing at all. Battery connection is good, relay I can hear ( I have also another Sprint for parts so, I switched a bunch of stuff like Solenoid, checked other relays, seems to all be ok. Thanks for input, it is appreciated. Cheers from California!

 

Thank you!

 

Bonjour sa va. I hope you enjoy the forum and the best bike maker on the planet.

 

Hi and welcome.

 

Hi and welcome......

 

Hi Mate and Welcome to the Forum