Front Wheel Hop

Discussion in 'Technical Help' started by 77bonnie, Feb 22, 2019.

Page 1 of 2
  1. 77bonnie

    77bonnie Member

    Sep 25, 2015
    34
    18
    Gulf Shores, Alabama
    #1 77bonnie, Feb 22, 2019
    Front wheel hop... 1977 Bonnie 42K on the speedometer... OKay, I am at whits end. Have done the following: New tire and tube (Dunlop K81), balanced three times, new set of springs, changed fork oil, measured everything that would move and calibrated, ran without brake disc, pumped up tires to 60 pounds, reduced air to 20 pounds, checked bearings and spindle, Tightened steering damper, checked true of wheel, made offerings to the Gods of Triumph, sent my first born on a pilgrimage to Meridan, even offer the wife for a Saturday Night Fling and the damn thing still hops (not the wife) at 40MPH. HELP! Any far flung suggestions would be appreciated.
     
    • Useful Useful x 1
  2. dilligaf

    dilligaf Guest

    #2 dilligaf, Feb 22, 2019
    Thoroughly check the back end of your bike :confused:
    It could be a case of the tail wagging the dog :eek:
     
    • Like Like x 2
    • Agree Agree x 2
  3. 77bonnie

    77bonnie Member

    Sep 25, 2015
    34
    18
    Gulf Shores, Alabama
    #3 77bonnie, Feb 22, 2019
    Checked the alignment and seems to be Okay... Anything I forgot?
     
    • Agree Agree x 1
  4. dilligaf

    dilligaf Guest

    #4 dilligaf, Feb 22, 2019
    Wheel bearings :confused:
    Torque settings :confused:
    Tyres seated properly :confused:
    Try without a steering damper :confused:
     
    • Like Like x 2
    • Agree Agree x 1
  5. Hamburg

    Hamburg Senior Member

    Dec 12, 2018
    788
    193
    Oxford, UK
    #5 Hamburg, Feb 22, 2019
    Bent forks?
     
    • Like Like x 1
    • Agree Agree x 1
  6. 77bonnie

    77bonnie Member

    Sep 25, 2015
    34
    18
    Gulf Shores, Alabama
    #6 77bonnie, Feb 22, 2019
    Next thing on the list will be to change the bearings, but how would the bearings cause wheel hop? With the old Triumph the solution to the problem is always something which seems unrelated. If you are thinking electrical it's usually mechanical. If you are thinking mechanical it's always electrical.
     
    • Agree Agree x 1
  7. 77bonnie

    77bonnie Member

    Sep 25, 2015
    34
    18
    Gulf Shores, Alabama
    #7 77bonnie, Feb 22, 2019
    Bent Forks? Nope. Checked the front end. All is where it supposed to be. Wheel hop starts around 40 MPH.
     
    • Agree Agree x 1
  8. TEZ 217

    TEZ 217 Crème de la Crème

    Mar 6, 2016
    3,152
    1,000
    south shields
    #8 TEZ 217, Feb 22, 2019
    HEADSTOCK ??
     
    • Agree Agree x 1
  9. 77bonnie

    77bonnie Member

    Sep 25, 2015
    34
    18
    Gulf Shores, Alabama
    #9 77bonnie, Feb 23, 2019
    Headstock? Please elaborate.
     
    • Agree Agree x 1
  10. Tricky-Dicky

    Tricky-Dicky Crème de la Crème

    Dec 12, 2016
    2,441
    1,000
    Norfolk UK
    #10 Tricky-Dicky, Feb 23, 2019
    Agreed! headstock bearing loose, can you describe just what you mean by hop?
     
    • Agree Agree x 2
  11. Callumity

    Callumity Elite Member

    Feb 25, 2017
    3,362
    800
    Nr Biggar
    #11 Callumity, Feb 23, 2019
    Last edited: Feb 23, 2019
    If we are to help most effectively we need more than ‘hop’. ....you might know what you mean by hop but it is open to wide interpretation from patter to suspension that ‘pops’ because the bushings are worn and sticking rather than sliding smoothly.

    Oscillating, clunking, bar wagging, speed sensitive etc

    Plus an exhaustive list of what you have AND haven’t done since it was last ‘right’ if it ever has been while you have owned it
     
    • Agree Agree x 2
    • Like Like x 1
  12. TEZ 217

    TEZ 217 Crème de la Crème

    Mar 6, 2016
    3,152
    1,000
    south shields
    #12 TEZ 217, Feb 23, 2019
    77bonnie replied
    Headstock? Please explain.


    Headstock Bearings and tightness check
     
    • Agree Agree x 1
  13. Samz

    Samz Elite Member
    Subscriber

    Aug 7, 2016
    142
    743
    York uk
    #13 Samz, Feb 23, 2019
    Keep it below or above 40mph.
    That should sort it. No charge. Ya welcome. ;)
     
    • Funny Funny x 1
    • Agree Agree x 1
  14. Oldyam

    Oldyam Grumpy Old Git

    May 14, 2017
    610
    500
    ireland
    #14 Oldyam, Feb 23, 2019
    Youre hopping around spending money willy nilly ...... start with @Callumity 's plan and work steadily along a logical line of investigation, starting off by describing the problem in more detail so we can try to help in a more informed way.
     
    • Agree Agree x 3
  15. 77bonnie

    77bonnie Member

    Sep 25, 2015
    34
    18
    Gulf Shores, Alabama
    #15 77bonnie, Feb 23, 2019
    At 40 MPH the forks start to vibrate and the front wheel begins to bounce. At 60 MPH the same no more no less. Two new tires in the past year, both Dunlop K81 from a supplier in New Jersey. I do not know if they are from the same lot. The first was definitely out of round. The second checked along with the rim and wheel balanced. New bearings were installed along with new fork springs and a new brake disc which was turned and yes the fork oil was changed along with a check of the seals. There appears to be no cracks or anything out of alignment in the front end. Also checked wheel alignment and anything and everything between. The problem started when the first new tire was installed and the mechanic destroyed the dust cover (right side) jamming the spindle. New bearings and spacers were installed and the spindle checked for roundness....... Would defective bearings or damaged spindle cause the problem?
     
    • Agree Agree x 1
  16. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,653
    1,000
    Southcoast of the UK Earth
    #16 darkman, Feb 23, 2019
    I would strip the forks from the bike and check the legs top n bottom for wear and also the damping units on the bottom of legs :)
     
    • Agree Agree x 1
  17. Oldyam

    Oldyam Grumpy Old Git

    May 14, 2017
    610
    500
    ireland
    #17 Oldyam, Feb 23, 2019
    Ok so what happens between 40 & 60 does the hopping continue or does it go away and come back ?

    Can you describe the "vibration" ..... is it the start of the hop as in up / down and building into the hop or oscillation as in side to side ?
     
    • Agree Agree x 1
  18. Callumity

    Callumity Elite Member

    Feb 25, 2017
    3,362
    800
    Nr Biggar
    #18 Callumity, Feb 23, 2019
    The spindle may be bent. Roll it on something like a big mirror or sheet of glass to check it for true.
    I am also curious about who/ how the wheel was balanced. Motorcycle wheels are normally balanced radially with limited concern for axial balance but if it is badly out it will be an issue - the new disc could be an issue.
    A dynamic balancer in a tire shop with a bike wheel adapter will confirm it one way or the other.
     
    • Agree Agree x 1
  19. Rocker

    Rocker Elite Member

    May 1, 2016
    1,662
    800
    Suffolk
    #19 Rocker, Feb 23, 2019
    Check for round with the wheel in the bike it sounds that’s the problem
     
    • Agree Agree x 1
  20. sprintdave

    sprintdave Nurse, think it's time for his medications.
    Subscriber

    May 25, 2014
    1,658
    750
    Birmingham
    #20 sprintdave, Feb 23, 2019
    If you have checked all the above and they check out ok, it could well be a faulty tyre, check the age on the side of the tyre, there is an oval with 4 digits inside it, like 1217, this means the tyre was made in the 12th week of 2017 if I recall correctly, tyres have a lifetime of about 5 years.
    Also is the tyre direction correct, there is an arrow showing direction of travel too.
     
    • Agree Agree x 1
Page 1 of 2
Loading...
Similar Threads - Front Wheel Hop
  1. Cibbersicks

    Thruxton Wtb - Thruxton 1200 R/rs Front Wheel

    Cibbersicks, Sep 3, 2025, in forum: Thruxton, Scrambler & Trident
    Replies:
    0
    Views:
    42
    Cibbersicks
    Sep 3, 2025
  2. Scoot65

    Wheel Chock Size V Front Wheel Size

    Scoot65, Dec 11, 2024, in forum: Triumph General Discussion
    Replies:
    5
    Views:
    1,089
    Bolosun
    Dec 18, 2024
  3. Tommi Saarento

    Wanted Early Speed Twin Right Fork Slider, Front Wheel And Front Mudguard

    Tommi Saarento, May 18, 2023, in forum: Wanted
    Replies:
    0
    Views:
    487
    Tommi Saarento
    May 18, 2023
  4. Geekytree

    Front Wheel Won't Spin After Tightening Up.

    Geekytree, Oct 31, 2021, in forum: Technical Help
    Replies:
    9
    Views:
    1,533
    Geekytree
    Oct 31, 2021
  5. Shaun Lee

    What Size Allen Key Is The Front Wheel Spindle?

    Shaun Lee, Nov 9, 2020, in forum: Speed Triple
    Replies:
    3
    Views:
    1,778
    Hubaxe
    Nov 9, 2020

Share This Page

Sign up