Motorcycle workshop lift - Triumph America

Discussion in 'America, Speedmaster & Rocket' started by Dodge74, Nov 28, 2014.

  1. Dodge74

    Dodge74 Active Member

    Oct 16, 2014
    151
    43
    Lincoln
    #1 Dodge74, Nov 28, 2014
    I've been thinking about getting one of these from a site on ebay called BS MOTOPARTS - they look pretty decent - just wondered if there was anyone out there who has tried one - my current rear paddock stand doesn't work on the America & although the front one does go under the forks - I want to take the forks out over the winter to give them a service - anyhow - here's a pic of the stand I was thinking of getting constands-midlift-s-3.jpg

    constands-midlift-s-3.jpg
     
    • Like Like x 3
  2. Recycled Rocker

    Recycled Rocker Senior Member

    Apr 19, 2014
    351
    113
    North Yorkshire Cave
    #2 Recycled Rocker, Nov 28, 2014
    Yo Dodge, not seen one before but looks well thought out and fully moveable round garage with bike still on (very carefully, and floor needs to be smooth as yer know). I've had a pal overbalance his America on a similar style stand, but my simpler one works fine on my Triumphs and HD's. No wheels on bottom,and rollers go inside frame rather than across garage floor as bike rises. £60/70 will get a German one , or Sealey, both on ebay as yer probably know :upyeah:
     
    • Like Like x 2
  3. PJT

    PJT Active Member

    Oct 20, 2014
    116
    43
    Leicestershire. UK.
    #3 PJT, Nov 28, 2014
    Looks to be pretty sturdy.
     
  4. crispey

    crispey crispey creme de la creme

    Nov 6, 2014
    7,280
    1,000
    Uk
    #4 crispey, Dec 1, 2014
    Hi Dodge,

    I recently bought one from them a couple months ago for my Thruxton. Once you find the balance point It sits quite sturdy, although it can feel a bit unsecure on there. I will make some "outriders" for extra support just to ease my nervousness. Also as the frame is quite flush with the engine I'm probably going to make some blocks to fit on the frame to lift it off the engine a bit. I wouldn't feel comfortable doing any heavy wrench work on it without some extra support. I was also able to push the bike around the drive-way a bit. Its good for the price £80 quid including p&p, I think. and the company were very helpful when I had a slight problem with it.

    lift.jpg

    lift.jpg
     
  5. SteveJ

    SteveJ Super Moderator

    Aug 12, 2013
    524
    113
    North Hampshire
    #5 SteveJ, Dec 2, 2014
    ABBA motorcycle lifts are very good :upyeah:

    Had one on my T595 and found it brilliant to use.
     
  6. Dodge74

    Dodge74 Active Member

    Oct 16, 2014
    151
    43
    Lincoln
    #6 Dodge74, Dec 2, 2014
    thanks for the input guys , I think I'll give it a go - I might make some stabilising posts though to give it extra support while I'm working it
     
  7. crispey

    crispey crispey creme de la creme

    Nov 6, 2014
    7,280
    1,000
    Uk
    #7 crispey, Dec 10, 2014
    Hey Dodge, let us know what you think of it when it arrives
     
  8. Dodge74

    Dodge74 Active Member

    Oct 16, 2014
    151
    43
    Lincoln
    #8 Dodge74, Dec 11, 2014
    I got this stand yesterday , it took 3 days from ordering it to arrive , which was pretty impressive , for around £5 delivery charge , and I've tried it out & its really impressive , the assembly needed was minimal , took about 10 mins , (and most of that was me looking for my circlip pliers :rolleyes:) anyway, it lifts the bike up quite high & the bike is very very stable on it , no need for any extra support , & if its let down onto the safety catches either side , the pressure is off the pump & I've just left it there , with both wheels a few inches off the floor . It's so safe that you can actually climb up & sit on the bike (yes I had to do it) . Well impressed with it , 90 quid well spent :upyeah:

    oh yeah , forgot to say, I can also wheel the bike around on it , which is dead handy for turning it round etc etc
     
    • Like Like x 1
  9. crispey

    crispey crispey creme de la creme

    Nov 6, 2014
    7,280
    1,000
    Uk
    #9 crispey, Dec 11, 2014
    Glad you like it. Must admit I haven't tried sitting on it yet, but have wheeled it around. The problem with it and the thruxton is that where the perfect balance point is is just where the oil filter is and as the engine is so flush to the frame I am concerned it might put undue pressure on the filter so I have not got it on the perfect spot. Once I have built up some brackets to put a bit of space between lift and parts of the frame it should work fine.
     
  10. Dodge74

    Dodge74 Active Member

    Oct 16, 2014
    151
    43
    Lincoln
    #10 Dodge74, Dec 11, 2014
    oh right , mine sits either side of the oil filter , I did think that the only down side with it is that I wouldn't be able to change the oil & filter because the stand is in the way , which is a bit of a shame but other than that it's spot on :upyeah:
     
  11. crispey

    crispey crispey creme de la creme

    Nov 6, 2014
    7,280
    1,000
    Uk
    #11 crispey, Dec 11, 2014
    What you can do is clear the filter by only using it as a centre stand, so use it to support the bike with the wheels on the ground, then you don't have to be in the sweet spot, balance wise that is!:wink:
     
    • Like Like x 1
Loading...
Similar Threads - Motorcycle workshop lift
  1. StephenMotoFun

    Do You Warm Up Motorcycle Engine In Winter?

    StephenMotoFun, Dec 15, 2025 at 10:09 AM, in forum: Triumph General Discussion
    Replies:
    5
    Views:
    332
    joe mc donald
    Dec 16, 2025 at 12:20 PM
  2. Mrs Visor

    Uk November Motorcycle Theft Report

    Mrs Visor, Nov 27, 2025, in forum: Lounge
    Replies:
    4
    Views:
    485
    CraigHew
    Nov 28, 2025
  3. littleade

    Motorcycle Live 2025

    littleade, Nov 17, 2025, in forum: Lounge
    Replies:
    72
    Views:
    3,925
    Iceman
    Dec 8, 2025
  4. ajc400

    Motorcycle Events 2026

    ajc400, Nov 3, 2025, in forum: Rideouts, Trackdays, Touring & Spotted
    Replies:
    4
    Views:
    1,003
    Bikerman
    Dec 12, 2025 at 11:01 AM
  5. StephenMotoFun

    How Often Should I Replace Motorcycle Coolant?

    StephenMotoFun, Aug 25, 2025, in forum: Technical Help
    Replies:
    3
    Views:
    857
    Pegscraper
    Sep 6, 2025

Share This Page

Sign up