Sprint ST1050 Sat nav

Garmin zumo

On my ST I bought a RAM mount system and fitted the handlebar ball joint on the front of the instrument cowl behind the screen, it raises the GPS to nearer the eyeline, RAM mount systems do a long extension and GPS mounting plate whoch makes life easier. Remove faring and route cable to under seat etc.

Used this for six years, the GPS mount was replaced by a Touratech secure adapter which locks via a key the GPS to the frame. i have a similar system on my TEX and only remove the GPS to update the firmware and software

 

Garmin Zumo on my Speed Triple.
All the ram mounts etc were in the box.Just run a wire to the battery and mount it on the handlebars(left hand side) leave the mount on all the time and just remove the sat nav.

 

Alas I haveno images but if you search rammount.com for this part

RAM-B-178U-A

And imagine it screwed to the top of the instrument housing then this is the start

RAM Motorcycle Mount

The above link is rammount

Touratech locking mounts

Touratech GPS brackets - GPS accessories - Navigation | Touratech Ltd

 

Tom Tom, sorry cannot help only had two Zumo's both have been great